Shield And Guards; Exhaust Warning - CONCORD PRECISION SHANK DRILL Assembly Manual

Hide thumbs Also See for PRECISION SHANK DRILL:
Table of Contents

Advertisement

When the instructional seat is used the machine
must be driven at a slower speed and on level
ground. Avoid quick starts, stops, and sharp turns.
Avoid driving on highways or public roads.

1.2.5 Shield and guards

All shields and guards must be in the correct
operating position and in good condition.
Do not open, remove, or reach around shields
while the engine is operating. Entanglement in
rotating belts and components can cause serious
injury or death. Stay clear of rotating components.
Do not operate the machine with the drive shaft
shields open or removed. Entanglement in rotating
drive shafts can cause serious injury or death. Stay
clear of rotating components.
Make sure rotating guards turn freely.

1.2.6 Exhaust warning

Never operate the engine in a closed building
unless the exhaust is vented outside.
Do not tamper with or modify the exhaust system
with unapproved extensions.
Fig. 8
Fig. 9
Fig. 10
13
1. Safety

Advertisement

Table of Contents
loading

Table of Contents