Duplexing Unit Motor; Side Registration Motor - Canon DU-82 Service Manual

B. Duplexing Unit Motor
1) Performing Step 1) on Page 3-3, remove
the upper guide.
2) Take off the PCB cover and remove the
connector.
Connector
Figure 3-5-2
3) Remove the 2 screws, and then the
motor fixing plate.
Screws
Motor fixing plate

Duplexing unit motor

Figure 3-5-3
4) Take out the 2 screws, then the duplex-
ing unit motor.
C. Side Registration Motor
1) Performing Step 1) to 5) on Page 3-3,
remove the lower guide.
2) Take off the PCB cover, then remove the
connector.
Connector
Figure 3-5-4
3) Remove the cable from the cable guide.
4) Remove the two screws and then the
motor fixing plate.
Cable guides
Cable
Screws
Motor fixing plate

Side registration motor

Figure 3-5-5
5) Take out the 2 screws, then the side
registration motor.
CHAPTER 3
3 - 13