Must be Grounded
This probe is grounded by the shell of the BNC connector through the
grounding conductor of the power cord of the measurement instrument.
Before making connections to the input leads of this probe, ensure
that the output BNC connector is attached to the BNC connector of the
measurement instrument, and that the measurement instrument is properly
grounded. Whenever it is likely that the ground protection is impaired,
you must make the instrument inoperative and secure it against any
unintended operation.
Compliance and Certifications
CE Compliance
This product meets the essential requirements of the applicable European
Directives as follows:
Electromagnetic Compatibility
This product meets the follow standard(s) of safety for electrical equipment
for measurement, control and laboratory use:
Safety
This product meets the follow standard(s) of safety for electrical equipment
for measurement, control and laboratory use:
Find Quality Products Online at:
z
2014/30/EU: Electromagnetic Directive (EMC)
2014/35/EU: Low-Voltage Directive (safety)
z
z
2011/65/EU: Restriction of Hazardous Substances Directive
(RoHS)
IEC/EN 61326-1
z
z
IEC/EN 55011
IEC/EN 61010-1
z
GlobalTestSupply
www.
Cal Test Electronics
.com
sales@GlobalTestSupply.com