Table of Contents
Advertisement
Useful functions
Activating voice functions
You can use a button on this unit to activate Siri or other voice functions on your smartphone or similar device.
1
Connect the Bluetooth
2
Press and hold [1/;/
Note
• For details about voice function commands, refer to the operating instructions for the Bluetooth
• The voice function may not work depending on the smartphone, etc., specifications and the app version.
Guidance messages
The unit is equipped with an a function that provides an audio notification when you turn on/off the unit, connect
®
a Bluetooth
device or change a setting, for example.
• This unit has English and French messages for the audio guidance.
• The audio guidance function cannot be disabled.
• The audio guidance volume cannot be adjusted.
∫ Switching the audio guidance language
Press and hold [j] and [Í/I ( )] for at least 5 seconds.
Battery level notification
• When the unit is turned off, an English guidance message will be heard indicating the battery level.
• When the battery level starts to run low, the blinking power/pairing LED will turn from blue to red, and as it
drops further, you will be notified by one beep every 1 minute.* When the battery runs out, an English
guidance message will be heard and the power will turn off.
*
If you press [Í/I (
level.
• It is possible to switch the audio guidance between English and French. (
Auto power off
If the unit is not connected to a Bluetooth
unit automatically approximately 5 minutes after you have stopped using it.
• It is possible to switch the audio guidance between English and French. (
®
device and the unit. (
] on this unit until the voice function is activated.
)] twice quickly, an English guidance message will be heard and you can check the battery
®
device, an English guidance message will be heard and turn off the
Operation
10, "Connecting a Bluetooth
l
l
l
15
®
device.
above)
above)
®
device")
Hide quick links:
Advertisement
Table of Contents
