Silex technology SX-ULPGN-EVK Quick Start Manual

QSG
QUICK
START
GUIDE
The following items should be present in the Evaluation Kit Box:

SX-ULPGN-EVK radio card.

USB-A to UART adapter cable (Communications & Power)

This Quick Start Guide
If any of the above items are missing please contact Silex Technology America
technical support immediately:
Tel (US): 866.765.8761
Tel (International): +1.801.748.1199
e.mail: support@silexamerica.com
Connect USB-A to UART adapter cable to headers (J1 and
J4) on the EVK board:
1
2
Connect the USB to UART cable to your computer. This will
power up the EVK board.
140-00211-100 RevA
.................................. SX-ULPGN-EVK
J4
J1
3
Open a terminal emulation application e.g. teraterm, PuTTy,
etc. (Serial settings: 115200N81)
4
Open a session associated with the COM port assigned to
the EVK.
The terminal session will display a shell> prompt. You now
5
have access to the demo platform console, configuration and
RED
evaluation of the system is covered in the next section.
Full documentation on the SX-ULPGN can be found on the Silex and Arrow
Websites.
The SX-ULPGN is based upon the Qualcomm QCA4010 chipset. Hardware
and software SDK s can be found on the Qualcomm Developer Network
(QDN.com)
microUSB
SX-ULPGN
Silex Technology America, Inc.