Adjusting Volume Settings; Alert Notification - Sanyo SCP-2700 User Manual

Adjusting Volume Settings

Adjust your phone's volume settings to suit your needs
and your environment.
1. Press
> Settings > Sounds > Volume
2.
Select ,
Ringer Earpiece
, or
Applications Start Up/Power Off
3. Press the navigation key left or right to choose a
volume level and press
Tip You can adjust the ringer volume in standby mode
(or the earpiece volume during a call) by using the
volume button on the left side of your phone.
You can make your phone vibrate at any volume
level by checking Always Vibrate .
You can set the alert volume separately from the ringer
volume setting.
1.
Press
> Settings > Sounds > Volume > Advanced...
2.
Select ,
Alarms Text Message
, or
Voice SMS Email
3.
Select
Separate Volume
36 2B. Settings
.
, ,
Headset Speakerphone
.
DONE (left softkey).
, ,
Picture Mail Voicemail
.
.
4.
Select a volume level, and press
Tip You can make the alert vibrate at any volume level
by checking Always Vibrate .

Alert Notification

,
Set your phone to alert you with an audible tone when
you change service areas, once a minute during a voice
call, or when a call has been connected.
1.
Press
2.
Select Beep Each Minute
Signal Fade/Call Drop
3.
Select
On
,
DONE
> Settings > Sounds > Alerts
, Out of Service
.
or .
Off
(left softkey).
.
, Connect , or