Table of Contents
Advertisement
TELE System
3
First time installation
When all the connections on the receiver are ready and the main lead is plugged in, the receiver will start up
automatically. If this does not happen, press the ON button on the remote control. A easy installation menu
will be displayed where you can set different parameters and then run the channel scan:
1. OSD Language: Use the arrow ◄/► buttons to select a language for the On Screen Display menu
(OSD). Press ▼ to go to the next parameter.
2. Region: Use the arrow ◄/► buttons to select your Country. Press ▼ to proceed.
CAUTION
If the wrong country is selected the channel scan may not detect all the channels available.
3. LCN Mode: When the Logical Channel Numbering option is active, the channels will be positioned in the
list with the broadcaster order automatically after the scanning. Press ▼ to go forward.
NOTA
If the LCN Mode is turn on, we suggest to not change the channel positions in the TV/Radio Channel List menu.
4. Tuner Setting (Antenna Power): If you have an active antenna press ◄/► to power the antenna, this is
necessary when, for instance, an indoor amplified antenna that is powered by the receiver.
ATTENTION
With a traditional antenna, like typical rooftop models, or an independently powered antenna, the antenna power
option must be set to off: RISK OF OVERLOAD.
5. Auto Scan: Press OK to start the automatic channel scan. When the scan is completed, the receiver will
enter the viewing mode.
6. Time Setting: As last, please check and set properly the receiver time, such as the Summer Time
option (section 4.4).
4 Receiver settings
The first time installation procedure (chapter 3) will allow the receiver to be used with its basic functions.
However the receiver offers many more advanced features and options that are illustrated in the following
sections.
4.1 Password
To modify some settings and view certain channels locked by the end-user in the Channel menu, a
password has to be entered. The factory set password is "0000" (four zeros) but it can be changed by pressing
MENU and selecting the Setup menu and then Parental Lock.
CAUTION
Take note and keep the new password in a safe place. If you forget your personal password, use the universal code "3327"
to access the Parental Lock menu and set a new Password.
4.2 Advanced Menu Protection (Hotel Function)
The Hotel Function is a hidden utility, which consists in an advanced protection of the receiver. It allows to
enter the menu through password and disable some buttons of the remote control.
In order to enable/disable that function, press MENU and input the system password (par. 4.1) using the
numerical buttons of the remote control.
20
20
TS6006
20
20
Advertisement
Table of Contents
