Table of Contents
Advertisement
TELE System
2 Product description and connections
2.1 Receiver and connections
CAUTION
It is good practice to connect the receiver with other appliances (e.g. TV, VCR, HI-FI, etc.) and the antenna
before plugging in the mains lead. When the receiver is powered electrical voltage differences
may be created when plugging in the jacks, which may generate currents that could damage the
appliances.
The direct TV SCART connection should always be used as a first operating test, since other more
complex connection sequences may give malfunctions that are not caused by faults or defects of the
actual appliances but by problems of incompatibility.
1. SCART SCART audio-video connection.
2. IR IN Infrared sensor input for remote control with LED status indicator (GREEN: active, RED: Stand-
by).
DC IN Power adaptor input (5V DC, 1 A) for the connection to the mains lead ( 230V AC, 50Hz).
3.
4. RF IN Antenna input.
5. RF OUT Antenna TV loop through output
6. USB USB port to read Photo (JPG), Audio (MP3), Video (MPEG2) and to record in SD format (MPEG2)
from the tuner inside the receiver.
17
17
TS6006
17
17
Advertisement
Table of Contents
