Philips Sonicare 2 HX6222/45 Manual page 9

4 Power on/off button
5 Battery level indicator
6 Charger
Note: The contents of the box may vary based on the model purchased.
Preparing for use
Attaching the brush head
1 Align the brush head so the bristles face the front of the handle
(Fig. 2).
2 Firmly press the brush head down on the metal shaft until it stops.
brush head.
Charging the appliance
1 Put the plug of the charger in a wall socket.
2 Place the handle on the charger (Fig. 3).
,
toothbrush is fully charged (Fig. 4).
Note: It can take up to 48 hours to fully charge the battery, but the Sonicare
may be used before it is fully charged.
Using the appliance
Brushing instructions
1 Wet the bristles and apply a small amount of toothpaste.
2 Place the toothbrush bristles against the teeth at a slight angle
towards the gumline (Fig. 5).
3 Press the power on/off button to switch on the Sonicare.
4 Apply light pressure to maximise Sonicare's effectiveness and let
the Sonicare toothbrush do the brushing for you. Do not scrub.
35_020_8039_2_DFU-Booklet_A6_v2.indd 9
ENGLISH
9
18/05/15 10:29