Contents Important safety instructions Hearing Safety General information 2 Your Bluetooth in-ear headphones What's in the box Other devices Overview of your Bluetooth wireless headset 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music...
1 Important General information safety To avoid damage or malfunction: instructions Caution Do not expose headphones to excessive heat Do not drop your headphones. Hearing Safety Headphones shall not be exposed to dripping or splashing. Do not allow your headphones to be submerged in water.
Bluetooth in-ear headphones USB charging cable (for charging only) Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips o ers, register your product at www.philips.com/welcome. With this Philips in-ear headphones, Quick start guide you can: •...
The micro USB charging slot on the headphones and; • The charger/USB port of a computer. LED turns white during charging and turns o when the headphones in fully charged. Normally, a full charge takes 2 hours. Philips SN503...
4 Use your Manage your calls and headset music Connect the headset to Task Button Operation your Bluetooth device Turn the Press and hold head- for 2 seconds. Turn on your mobile phone/ phones on. Bluetooth device. Press and hold Turn the head- for 3 seconds.
Page 8
Other headphones indicator status Headphones status Indicator The headphones The blue LED are connected ashes for every to a Bluetooth 10 seconds. device, while the headphones in standby mode or while you are listening to music. The headphones The LED ashes are ready for blue and white pairing.
Directive before disposing the headphones. • Make sure the headset is discon- of Conformity on www.p4c.philips.com. nected from the charging case before removing the battery. Disposal of your old product and battery...
This transmitter must not be co-located Notice of compliance or operating in conjunction with any other antenna or transmitter. The device complies with the FCC rules, Part 15. Operation is subject to the Canada: following two conditions: This device contains licence-exempt 1.
7 Frequently headset. asked • The headset may be connected to a previously paired device. Turn o the questions connected device or move it out of range. • Pairing may have been reset or the headset has been previously paired My Bluetooth headset does not turn on.
Page 13
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Limited is the warrantor in relation to this product.