Kenwood TTM020A Series Instructions Manual page 5

Dry/stale bread toasts more quickly
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
For best results ensure that the
bread slices are of an even
thickness, freshness and size.
In order to achieve uniform browning
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. Alternatively
select a lower setting when
additional toasting is carried out.
warming rack safety
1 Never set the browning control
higher than 3 when using the
warming rack.
2 Never completely cover the warming
rack.
3 When using the warming rack, never
wrap the food up. Plastic wrapping
will melt and could catch fire. Foil will
reflect heat, damaging the toaster.
4 If you're using the toaster slots,
always remove the warming rack so
it can't burn you.
5 Always allow the warming rack to
cool before removing from the
toaster. Never place a hot warming
rack on a work surface.
6 Never touch hot surfaces, especially
the metal areas of the warming rack.
to use the warming rack
1 Place the warming rack on top of
toaster .
2 Put your food on top of the rack
(slicing thick items in half will speed
up the warming process).
3 Set the browning control no higher
than 3 ( ).
4 Lower the lever.
5 At the completion of the warming
cycle the toaster will switch off
automatically. Turn the items over
and repeat the operation. Watch to
make sure they don't burn.
6 To remove the warming rack, allow
the toaster to cool and unplug.
7 Lift off the warming rack.
hints for the warming
rack
The warming rack can also be used
as a toast rack, but ensure it is cool
before removing from the toaster.
care and cleaning
1 Before cleaning, unplug your toaster
and let it cool down.
2 Slide out the crumb tray
then replace. Do this regularly:
crumbs can smoke or even burn.
Do not dishwash the crumb
tray.
3 Wipe the outside of the toaster and
the warming rack with a damp cloth,
then dry. Do not use abrasives.
service & customer care
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
using your toaster or
servicing or repairs (in or out of
guarantee)
call Kenwood Customer Care on
023 9239 2333 or visit
www.kenwoodworld.com. Have
your model number ready
(e.g. TTM020A or TTM060)
and date code (5 digit code
e.g. 13L35) ready. They are on
the underside of your toaster.
spares and attachments
call 0844 557 3653.
other countries
If you experience any problems with
the operation of your appliance,
before requesting assistance visit
www.kenwoodworld.com.
Please note that your product is
covered by a warranty, which
complies with all legal provisions
concerning any existing warranty
and consumer rights in the country
where the product was purchased.
5
. Clean,