Advertisement
UFP-280 LCD Mount Adapter
UFP-280 LCD Mount Adapter Installation Instructions
Parts List
Mounting Bracket
(Qty 1).
M4 x 16mm
Phillips Head Screw
(Qty 4)
M5 x 16mm
Slotted Head Screw
(Qty 4)
M6 x 20mm
Phillips Head Screw
(Qty 4)
NOTE: The hardware used for your application will vary. Please use the appropriate hardware from the list
above.
NOTE: The mount that is shown in these installation instructions is for instructional purposes only.
The purchased mount may vary in appearance.
UFP-280 Installation
The UFP-280 LCD Mount Adapter can be used with any VESA 75 x 100 model.
1.
Invert the monitor and place it on a soft and flat surface.
2.
Secure the UFP-280 to the back of the monitor by using the appropriate mounting hardware (please see
Parts List).
3.
Secure the UFP-280 Adapter plate to the end of the mount that was purchased. Use the M4 x 6mm
Phillips Head screws (4ea).
4.
When complete, secure the display with the provided display hardware (supplied).
CAUTION: Do not over tighten the screws to the monitor. Failure to do so could result in damaging
the threads and monitor.
Installation Instructions
M6 x 30mm
Phillips Head
Screw
(Qty 4)
M4 x 20mm
Phillips Head
Screw
(Qty 4)
M5 Flat Washer
(Qty 4)
M4 x 6mm
Phillips Head
Screw
(Qty 4)
M6 x 12mm
Phillips Head
Screw (Qty 4)
M5 x 12mm
Phillips Head
Screw (Qty 4)
M4 Flat
Washer
(Qty 4)
Page - 1 -
Advertisement
Table of Contents
Related Manuals for Premier Mounts UFP-280
Summary of Contents for Premier Mounts UFP-280
- Page 1 Secure the UFP-280 to the back of the monitor by using the appropriate mounting hardware (please see Parts List). Secure the UFP-280 Adapter plate to the end of the mount that was purchased. Use the M4 x 6mm Phillips Head screws (4ea).
- Page 2 UFP-280 LCD Mount Adapter Mounting Screws (4ea) Mounting Holes UFP-280 Monitor Figure 1. UFP-280 Installation UFP-280 Mounting Screws Monitor Figure 2. Mount Installation NOTE: Unless purchased, the mount shown above is being used for illustration purposes only. Page - 2 -...
Need help?
Do you have a question about the UFP-280 and is the answer not in the manual?
Questions and answers