ECOTHERM ® Contents Heat transfer tecHnology Introduction 1.1 Preparing for installation 1.1.1 Unpacking the storage tanks 1.1.2 Check valves for cold water supplie and circulation connections 1.1.3 Filter recommendations 1.1.4 Heating water pressure 1.1.5 Expansion tank 1.1.6 Tank legs 1.1.7 Copper piping and water bourne chloride ions...
1. Introduction congratulations! With the purchase of your storage water heater from ecotHerM you have opted for a device incorporating the ultimate in hygiene, economy, reliability and functionality. We are convinced that your users will enjoy the benefits of your storage water heater for a long time.
1.1.1 Transport, handling and unpacking of heat exchangers by intake of foreign circumstances be screwed or fixed to the storage water heater may only bodies, ecotHerM recommends that the floor, otherwise expansion strain be transported in depressurised strainers be placed in front of supply will cause cracks, which may lead to condition.
In the vicinity ecotHerM service engineer. The safety valve shall be fitted in the of the safety valve a warning sign cold water pipe and there should be...
ECOTHERM ® Safety Instructions and General Information Heat transfer tecHnology 2.4 Storage insulation 2.4.2 Insulation mounting a optimizing insulation of the storage ● Unpack the polyurethane hard shells and check for damage. tank and the piping should be rati- ●...
4.2 Closing and opening the storage tank vessel storage tanks must be sealed such that all seals provided are used in ecotHerM storage water heater accordance with specifications. Sealing surfaces must be clean and unda- will increase its life and reliability.
ECOTHERM ® Cleaning and Servicing Heat transfer tecHnology 4.2.1 For servicing ● Disconnect the appliance from the power supply. Drain the tank via the drain valve (Item 1). ● remove the flange cover (Item 2). ● ● lime scale deposits and contamination can be flushed out via the drain valve.
Need help?
Do you have a question about the Storage Water Heater and is the answer not in the manual?
Questions and answers