Installation; Before Installation; Installation Materials - Miele DA 2450 Operating And Installation Instructions

Before installation


Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
The cooker hood is intended for
installation in a wall unit, chimney unit
or above breakfast bars or island areas.
 Check prior to installation that the top
of the appliance will be accessible
after installation.
If this is not the case, install the exhaust
ducting and prepare the mains
connection before installation.

Installation materials

Screws, 3.5 x 16 mm
for securing the cooker hood.
The screws supplied are intended for
securing the cooker hood to a solid
wooden cabinet floor with a
minimum thickness of 16 mm.
Ensure the cabinet floor can
permanently support the weight of
the appliance.
Conversion kit for recirculation
mode
including directional unit, aluminium
hose and hose clips (the conversion kit
is not supplied and must be purchased
separately. See "Technical data").
Keep the following in a safe place:
Installation plan
See the installation plan for details on
the individual steps involved in the
installation of this appliance.
1 lever
for removing lamps.

Installation

23