Advertisement
1. Press POWER key to turn on the pump
2. Open door & move lever on the left up
3. Install infusion set from left to right & close door
4. Set infusion parameters & press ENTER key to save
5. Press START to start infusion
o Press the soft key on the top left of the screen and the STOP button at
the same time
o To get back to the 'Rate Mode' interface from the Settings interface, press
the same 2 keys at the same time
o Press the SILENCE key on the front of the pump to silence any alarm
o To silence 'Air in Line' alarm, you must also open door
o You must manually start pump after the alarm is silenced and occlusion
has been cleared
BASIC OPERATION
INFUSION INTERFACE TO SETTINGS
SILENCE ALARMS
Advertisement
Table of Contents
Related Manuals for Practivet Infusion Pump
Summary of Contents for Practivet Infusion Pump
- Page 1 BASIC OPERATION 1. Press POWER key to turn on the pump 2. Open door & move lever on the left up 3. Install infusion set from left to right & close door 4. Set infusion parameters & press ENTER key to save 5.
- Page 2 CALIBRATING PUMP 1. Select ‘Tube’ on menu in settings interface 2. Use the + & - to find the ‘Tube’ you want to calibrate 3. When the tube you want to calibrate appears on the menu press ENTER 4. Press ‘Accu.’ 5.
Need help?
Do you have a question about the Infusion Pump and is the answer not in the manual?
Questions and answers
how to adjust the volume (as in sound not rate) or how to silence the machine for longer then 2 minutes 30 seconds