Timer; Alarm; Quick Start; Setting The Time And Date - Timex Expedition 810-095009-NA User Manual

• Option to display lap or split time in larger digits.
• During chronograph use, the WS4
can be seen in Review Mode.

Timer

Countdown timer works up to 100 hours, with the option to repeat countdown up
to 99 times.

Alarm

• Choose from daily, weekday, weekend, or weekly alarms.
• One-time backup alert if alarm is ignored.
10
™ watch records key activity statistics that

QUICK START

The next three pages will give you the basics you need to get your watch up
and running in under 5 minutes. Continue reading for full instructions.

Setting the Time and Date

1. Press MODE until time of day appears.
2. Press and hold SET to start.
3. Press START/SPLIT (+) or STOP/RESET (-) to increase or decrease setting
values for time zone, time, date, sounds, and measurement units.
4. Press MODE (NEXT) to advance to the next setting option.
5. Press SET (DONE) to finish.

Calibrating the Compass

Prior to calibrating, remove the watch from your wrist, hold it in your hand,
and choose a declination angle from the table on pages 24 and 25.
1. Press MODE until COMPASS appears.
2. Press and hold SET to start.
11