Table of Contents
Advertisement
2.4
Starting up for the first time
1.
After making all the connections, replace the system case cover.
2.
Ensure that all switches are off.
3.
Connect the power cord to the power connector at the back of the system chassis.
4.
Connect the power cord to a power outlet that is equipped with a surge protector.
5.
Turn on the devices in the following order:
6.
After applying power, the system power LED on the system front panel case lights up.
after the system LED turns on.
the power, the system may have failed a power-on test. Check the jumper settings and
connections or call your retailer for assistance.
BIOS Beep
One short beep
One continuous beep followed by two
short beeps then a pause (repeated)
One continuous beep followed by three
short beeps
One continuous beep followed by four
short beeps
instructions in Chapter 3.
2.5
Turning off the computer
setting.
2-20
Description
Quick boot set to disabled
No keyboard detected
No memory detected
Hardware component failure
Chapter 2: Basic Installation
Hide quick links:
Advertisement
Table of Contents
