Advertisement
Hardware Component Instructions
USB Port
18
PC/Mobile Port
17
Security Slot
16
13
MIC Port
15
Speaker
14
LED Indicator
13
Microphone
12
Off-hook Key
3
Redial Key
9
Mute Key
10
Volume Key
11
Configuring Your Phone
Configuring via web user interface
Accessing the web user interface:
1. Press the OK key when the phone is idle to obtain the IP address of the phone.
2. Open the web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10"
or "192.168.0.10") and press Enter.
3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm.
Account Settings: Click on Account -> Register.
Parameters of the account:
Register Status:
It shows the register status of the current account.
Line Active:
You can select Enabled/Disabled to enable/disable the account.
Label:
It is shown on the LCD screen to identify the account.
Display Name:
It is shown as Caller ID when placing a call.
It is an authenticated ID for authentication provided by ITSP (required).
Register Name:
User Name:
It is provided by ITSP for registration (required).
Password:
It is provided by ITSP for registration (required).
Server Host:
It is provided by ITSP for registration (required).
Register status icons on the LCD screen:
Registered
Register Failed
Note: Check with your system administrator if any error appears during the registration process or if a specific
configuration is required for your registration.
Configuring via phone user interface
Account Settings:
Press the Menu soft key when the phone is idle, select Settings ->Advanced Settings (default password: admin)
-> Account to configure the account.
Note: For more information on account parameters, refer to Configuring via web user interface.
4
Internet Port
19
20
DC5V Port
12
15
13
12
1
LCD Screen
2
Soft Keys
On-hook Key
4
Up Navigation Key
5
6
OK Key
7
Down Navigation Key
8
Keypad
Registering
Basic Call Features
Placing a Call
Do one of the following:
- Press
.
Enter the number, and then press
,
,
- Enter the number.
Press
,
,
or the Send soft key.
Answering a Call
Press
,
or the Answer soft key.
Note: You can reject an incoming call by pressing the Reject soft key.
Ending a Call
Redial
Press
to enter the Placed Calls list, press
Sendsoft key.
Press
twice when the phone is idle to dial out the last dialed number.
Call Mute and Un-mute
Press
to mute the microphone during a call.
Press
again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press the Hold soft key during an active call.
To resume the call, do one of the following:
If there is only one call on hold, press the Resume soft key.
If there is more than one call on hold, press
Resume soft key.
Local Conference
CP860 can host up to five-way conference call with other parties.
To create a three-way local conference:
1. Press the Conf soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press the Conf soft key again when the second party answers.
To join more parties in an established conference call:
1. Press the Manage soft key after the conference call is established.
2. Press the New Call soft key to place a new call.
3. Enter the number of the new party, and then press
or the Send soft key.
or
to select the desired entry, and then press
or
to select the desired held call, and then press the
,
,
or the Send soft key.
or the
5
Advertisement
