Advertisement
4. Press the Conf soft key when the party answers.
5. Repeat the steps 1 to 4 to join more parties in the established conference call.
During the conference call, you can do the following:
Press the Hold soft key to place the conference on hold.
Press the Split soft key to split the conference call into individual calls on hold.
Press the Manage soft key, and then press
-
Press the FarMute soft key to forbid the selected party from speaking. The muted party can hear everyone, but
no one can hear the muted party.
-
Press the New Callsoft key to place a new call.
-
Press the Back soft key to return to the previous screen.
Press
to mute the conference call.
Press the Cancel soft key to drop the conference call.
Call Recording
If you insert a USB flash drive into the USB port on your phone, you can record active calls and conferences on
your phone.
Note: It is necessary to know about the rules and restrictions of any governing call-recording in the place you are in.
It is also very important to have the consent of the person you are calling before recording the conversation.
To record a call:
1. Press the More soft key, and then press the Start REC soft key during a call.
To stop recording:
1. Press the More soft key, and then press the Stop REC soft key.
Recorded Calls Playback
You can play back recorded calls on your phone through the phone's speaker.
To browse the recorded files:
1. Press Menu -> USB Record -> Playback Recording.
2. Press
or
to scroll through the recorded files.
To play back a recording:
1. Press Menu -> USB Record -> Playback Recording.
2. Press
or
to highlight the recording you want to paly back.
3. Press the Play
soft key.
During the recording playback, you can do the following:
To pause the playback, press the Pause soft key.
You can press the Play soft key to continue the playback.
To skip forward the playback, press
. Press once to skip forward 8 seconds.
To rewind the playback, press
. Press once to rewind 8 seconds.
To stop the playback, press the Back soft key.
6
or
to select the desired party:
3. Connect the optional expansion microphone, as shown below:
Note: Up to two expansion microphones can be connected to an IP conference phone.
4. Connect the optional PC or mobile device, as shown below:
Startup
After the IP phone is connected to the network and supplied
with power, it automatically begins the initialization process.
When the IP phone is first powered on, it goes to the setup
wizard screen with a short music after startup. The setup
wizard guides you to configure some basic features via phone
user interface. After you complete the setup wizard, the phone
is ready for use. You can configure the phone via phone user
interface or web user interface.
Mobile/PC
3
Advertisement
