Table of Contents
Advertisement
IFC6410
User Guide
001821 Rev C
August 20, 2013
Submit technical questions at:
http://www.inforcecomputing.com/techweb/
Confidential and Proprietary – Inforce Computing Inc.
NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or web sites
techsupport@inforcecomputing.com
to:
.
Restricted Distribution: Not to be distributed to anyone who is not an employee of either Inforce Computing or
its subsidiaries without the express approval of Inforce Computing.
Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to
others without the express written permission of Inforce Computing, Inc.
Inforce Computing is a trademark of Inforce Computing Incorporated, registered in the United States
and other countries. All Inforce Computing Incorporated trademarks are used with permission. Other
product and brand names may be trademarks or registered trademarks of their respective owners.
This technical data may be subject to U.S. and international export, re-export, or transfer ("export") laws.
Diversion contrary to U.S. and international law is strictly prohibited.
Inforce Computing Inc.
48820 Kato Road, # 600B
Fremont, CA 94538
U.S.A.
© 2013 Inforce Computing Inc.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for inforce IFC6410
Summary of Contents for inforce IFC6410
- Page 1 NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or web sites techsupport@inforcecomputing.com Restricted Distribution: Not to be distributed to anyone who is not an employee of either Inforce Computing or its subsidiaries without the express approval of Inforce Computing.
- Page 2 Reviewed By Project Engineer Sebastian V.P August 20, 2013 Approved By Project Manager Devaraj P S August 20, 2013 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA...
- Page 3 License Agreement License Agreement Your use of this document is subject to and governed by those terms and conditions in the Inforce Computing Purchase and Software License Agreement for the APQ8064 based IFC6410, which you or the legal entity you represent, as the case may be, accepted and agreed to when purchasing a IFC6410 from Inforce Computing Inc.
- Page 4 IFC6410 User Guide Preface Preface This User guide explains the hardware, software, setup and usage of system IFC6410. Intended Audience This document is intended for technically qualified personnel. It is not intended for general audiences. Intended Use All Inforce boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar locations.
- Page 5 Every effort has been made to ensure the accuracy of the document. If you have any comments, questions, or ideas regarding the user guide, Contact technical support: techsupport@inforcecomputing.com 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA...
- Page 6 Serial Advanced Technology Attachment Single-Board Computer Secure Digital Controller Serial Peripheral Interface UART Universal Asynchronous Receiver Transmitter Universal Serial Bus 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA...
-
Page 7: Table Of Contents
3.2 HARDWARE OPERATION ......................6 3.2.1 BOOT CONFIGURATION ..................... 6 3.2.2 LED INDICATIONS ....................... 7 3.2.3 CONNECTOR CO-ORDINATES ................... 8 3.2.4 STEPS TO BOOT IFC6410 ....................9 4 SOFTWARE SPECIFICATION ......................11 4.1 OPERATING SYSTEM ....................... 11 5 APPENDIX A ............................. 12 5.1 CONNECTOR PIN ASSIGNMENTS .................. - Page 8 Table of Figure Table of Figure Figure 1: Block Diagram ......................2 Figure 2: IFC6410 Board Top Side ..................... 4 Figure 3: IFC6410 Board Bottom Side ..................5 Figure 4: Boot Selection Switch ....................6 Figure 5: LED locations on board ....................7 Figure 6: Connector Co-ordinates TOP ..................
- Page 9 IFC6410 User Guide Table of Table Table of Table Table 1: System hardware specification ..................3 Table 2: IFC6410 Board Locations ..................... 4 Table 3: Boot selection ....................... 6 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION viii Confidential and Proprietary –...
-
Page 10: Scope
Use a grounded anti-static mat Use a grounded wrist or foot strap Hardware Identification Labels Labels are present on the IFC6410 board. The following information is conveyed on IFC6410 board: Serial Number Ethernet MAC address WIFI MAC address ... -
Page 11: Hardware Specification
HARDWARE SPECIFICATION 2 HARDWARE SPECIFICATION 2.1 INTRODUCTION IFC6410 SBC provides a reference design for Qualcomm Snapdragon S4 Pro APQ8064 where customers can design, develop, test, and deploy their product solutions around the processor. 2.2 ARCHITECTURE The functional diagram IFC6410 SBC is shown below. -
Page 12: System Specification
IFC6410 board is operated from following sources 5V DC Jack (5V, 3A) Power Consumption Total approximate power of IFC6410 is 12W. This will be varied depends on the application and IOs used. 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary –... -
Page 13: Board Layout And Subsystems
IFC6410 User Guide HARDWARE SPECIFICATION 2.5 BOARD LAYOUT AND SUBSYSTEMS Figure 2: IFC6410 Board Top Side Table 2: IFC6410 Board Locations 1. JTAG 8. Power/Reset Header 15. Microphone Jack 22. DC Jack 2. Antenna-Wi-Fi/BT 9. Reset Button 16. Dual MIC Header 23. -
Page 14: Figure 3: Ifc6410 Board Bottom Side
IFC6410 User Guide HARDWARE SPECIFICATION Figure 3: IFC6410 Board Bottom Side 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 15: System Setup And Usage
Fast and secure boot selection CONFIG_6 Function (Position-3) SECURITY BOOT FAST BOOT Figure 4: Boot Selection Switch Config-0 (Pos1) Config-1 (Pos2) Config-6 (Pos3) 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 16: Led Indications
CPU Reset LED S4 power rail indicator Bluetooth indicator LED 5V power rail indicator Figure 5: LED locations on board 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 17: Connector Co-Ordinates
IFC6410 User Guide SYSTEM SETUP AND USAGE 3.2.3 CONNECTOR CO-ORDINATES Figure 6: Connector Co-ordinates TOP 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 18: Steps To Boot
SYSTEM SETUP AND USAGE Figure 7: Connector Co-ordinates BOTTOM 3.2.4 STEPS TO BOOT IFC6410 1. Remove the IFC6410 board carefully from the anti-static bag NOTE: Handle with care, while plugging, to avoid physical damage. 2. Connect the display through HDMI/LVDS 3. -
Page 19: Figure 8: Android
First time booting might take longer time, than normal booting. Screenshots shown for reference only, actual display may vary depending on the software release. 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 20: Software Specification
IFC6410 User Guide SOFTWARE SPECIFICATION 4 SOFTWARE SPECIFICATION 4.1 OPERATING SYSTEM Operating system used in IFC6410 is Android Jelly Bean 4.1.2 Version or higher. 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. -
Page 21: Connector Pin Assignments
EXP_CONN_GPIO_4 EXP_CONN_GPIO_5 EXP_CONN_GPIO_6 EXP_CONN_GPIO_7 EXP_CONN_GPIO_8 1,3,5,7,8,9,10,19,20,29,30 I2C2_CLK I2C2_DATA SLIMBUS2_DATA SPI_CLK SPI_CS0# SPI_MISO SPI_MOSI V1P8_VREG_S4 V3P3 Figure 10: Expansion Connector 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 22: Jtag Pin Out
Pitch: 2.0mm Pin Number Signal name CPU_JTAG_RTCK CPU_JTAG_SRST# CPU_JTAG_TCK CPU_JTAG_TDI CPU_JTAG_TDO CPU_JTAG_TMS CPU_JTAG_TRST# 9,10 JTAG_CONN_DET# Figure 11: JTAG Header 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 23: Camera Connector Pin Out
FLASH_CTRL_EN1 FLASH_NOW 3,9,10,16,17,22,25,28,29,33,34,37,40 GND I2C4_CLK I2C4_DATA MIPI_CSI0_LANE0_EMI_N MIPI_CSI0_LANE0_EMI_P MIPI_CSI0_LANE1_EMI_N MIPI_CSI0_LANE1_EMI_P MIPI_CSI0_LANE2_EMI_N MIPI_CSI0_LANE2_EMI_P MIPI_CSI0_LANE3_EMI_N MIPI_CSI0_LANE3_EMI_P V1P2_CAMD V1P8_CAMD V2P8_CAMA V2P8_VACT 1,2,4 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 24: Lvds Connector Pin Out
I2C3_CLK_3P3_LVDS LVDS_TX4_P LVDS_TX4_N LVDS_TX5_P LVDS_TX5_N LVDS_TX6_P LVDS_TX6_N LVDS_TX7_P LVDS_TX7_N CLK_170M_1_LVDS_P CLK_170M_1_LVDS_N DISP_PWR_EN_3P3_N DISPLAY_GPIO_3 DISP_3P3_RST# DISPLAY_GPIO_2 BACKLIGHT_PWM_3P3_EN V1P8_VREG_S4 37,39 LVDS_CONN_HV_SUPPLY 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 25: Display Backlight Power Header Pinout
Manufacturer part number: 68031-104HLF Manufacturer: FCI Pitch: 2.54 mm Pin Number Signal name DISP_PWR_EN_3P3_N BACKLIGHT_PWM_3P3_EN V5_JACK_FUSE Figure 12: Display Backlight Power Header 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 26: Power Header Pinout
5.1.6 POWER HEADER PINOUT Manufacturer part number: 68031-102HLF Manufacturer: FCI Pitch: 2.54mm Pin Number Signal name V5_USB_OUT_DCIN Figure 13: Power Header 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 27: Rtc Header Pinout
5.1.7 RTC HEADER PINOUT Manufacturer part number: TMM-102-03-T-S Manufacturer: Samtec Pitch: 2.0mm Pin Number Signal name V3_COIN Figure 14: RTC Header 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 28: Power And Reset Header Pinout
Manufacturer part number: 77313-818-04LF Manufacturer: FCI Pitch: 2.54mm Pin Number Signal name PWRBTN_R RSTBTN_R Figure 15: Power and Reset Header 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 29: Dual Mic Header Pinout
P6.1 First pin of P6 header P6.2 second pin of P6 header Figure 16: Dual MIC Header P5.2 P6.2 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 30: Rs232 Header Pinout
Manufacturer part number: 22032031 Manufacturer: Molex Incorporated Pitch: 2.54mm Pin Number Signal name UART_CONN_TX UART_CONN_RX Figure 17: RS232 Header 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 31: Contact Information
Magrath Road, Bengaluru - 560 025 Karnataka, India. Phone: +91-80-25566699 For technical assistance refer: http://www.inforcecomputing.com/techweb For technical support contact: techsupport@inforcecomputing.com For sales contact: sales@inforcecomputing.com 001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA...
Need help?
Do you have a question about the IFC6410 and is the answer not in the manual?
Questions and answers