Table of Contents
Advertisement
Inforce 6309™
User Guide
002685 Rev H
November 13, 2018
Submit technical questions at:
http://www.inforcecomputing.com/techweb/
Confidential and Proprietary – Inforce Computing, Inc.
NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public
servers or web sites to: techsupport@inforcecomputing.com.
Restricted Distribution: Not to be distributed to anyone who is not an employee of either Inforce
Computing or its subsidiaries without the express approval of Inforce Computing.
Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in
any manner to others without the express written permission of Inforce Computing, Inc.
Inforce Computing is a trademark of Inforce Computing Incorporated, registered in the United
States and other countries. All Inforce Computing Incorporated trademarks are used with
permission. Other product and brand names may be trademarks or registered trademarks of their
respective owners.
This technical data may be subject to U.S. and international export, re-export, or transfer
("export") laws. Diversion contrary to U.S. and international law is strictly prohibited.
Inforce Computing, Inc.
48820 Kato Road, # 600B
Fremont, CA 94538
U.S.A.
© 2018 Inforce Computing, Inc.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for inforce 6309
Summary of Contents for inforce 6309
- Page 1 NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or web sites to: techsupport@inforcecomputing.com. Restricted Distribution: Not to be distributed to anyone who is not an employee of either Inforce Computing or its subsidiaries without the express approval of Inforce Computing.
- Page 2 13/November/2018 updated section 2.2 Approval Record Function Name Date Checked By SS/DJ 13/November/2018 Reviewed By 13/November/2018 Approved By 13/November/2018 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA...
- Page 3 License Agreement License Agreement Your use of this document is subject to and governed by those terms and conditions in the Inforce Computing Purchase and Software License Agreement for the APQ8016 based Inforce 6309 development platform, which you or the legal entity you represent, as the case may be, accepted and agreed to when purchasing a Inforce 6309 development platform from Inforce Computing Inc.
- Page 4 Inforce 6309™ User Guide Preface Preface This User Guide familiarizes the end user with the specification, interfaces, setup, and usage of the Inforce 6309 board. Intended Audience This User Guide is intended for technically qualified personnel. It is not intended for general audiences.
- Page 5 Serial Advanced Technology Attachment Single Board Computer Secure Digital Controller Serial Peripheral Interface UART Universal Asynchronous Receiver Transmitter Universal Serial Bus 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA...
-
Page 6: Table Of Contents
3.2 HARDWARE OPERATION ......................... 6 3.2.1 CONFIGURATION SWITCHES ....................6 3.2.2 LED INDICATIONS ........................8 3.2.3 CONNECTOR COORDINATES ....................9 3.2.4 STEPS TO BOOT INFORCE 6309 SBC ................... 10 3.3 POWER MEASUREMENT ....................... 11 3.3.1 5V RAIL ............................. 11 3.3.2 VPH RAIL ..........................11 3.4 ANTENNA CONFIGURATIONS ....................... - Page 7 Table of Figures Table of Figures Figure 1: Block Diagram ..........................2 Figure 2: Inforce 6309 Board Locations (Top View) ..................4 Figure 3: Inforce 6309 Board Locations (Bottom View) ................5 Figure 4: Configuration Switch SW4 ......................6 Figure 5: LED Locations on the Board ......................8 Figure 6: Top Connector Coordinates ......................
- Page 8 Inforce 6309™ User Guide Table of Tables Table of Tables Table 1: System Hardware Specification ...................... 3 Table 2: Inforce 6309 Board Locations ......................5 Table 3: Boot Selection ..........................7 Table 4: USB Mode Selection ........................7 Table 5: Display Selection..........................7 Table 6: Auto Boot Selection.........................
-
Page 9: Scope
Use a grounded anti-static mat Use a grounded wrist or foot strap Hardware Identification Labels Labels are present on the Inforce 6309 board. The following information is conveyed on the Inforce 6309 board: Serial Number Ethernet MAC Address ... -
Page 10: Hardware Specification
Hardware Specification 2. HARDWARE SPECIFICATION 2.1 INTRODUCTION The Inforce 6309 SBC can be used to develop, test, and deploy end-user product solutions around Qualcomm Snapdragon 410, APQ8016 processor. 2.2 ARCHITECTURE The functional diagram of the Inforce 6309 SBC is shown below. -
Page 11: System Specification
Inforce 6309™ User Guide Hardware Specification 2.3 SYSTEM SPECIFICATION The following table shows the hardware specification of the Inforce 6309 SBC. Table 1: System Hardware Specification Processor and Peripherals Processor Qualcomm Snapdragon 410 APQ8016 (14mm × 12mm package) Memory Devices... -
Page 12: Electrical Characteristics
Inforce 6309™ User Guide Hardware Specification 2.4 ELECTRICAL CHARACTERISTICS Power Supplies The Inforce 6309 board is operated from the following sources: 12V DC jack/12V from add-on interface 3.7V battery operation (with limited functionality) NOTE 12V is the default power supply ... -
Page 13: Figure 3: Inforce 6309 Board Locations (Bottom View)
Inforce 6309™ User Guide Hardware Specification Figure 3: Inforce 6309 Board Locations (Bottom View) Table 2: Inforce 6309 Board Locations Description Description Front Panel Header APQ8016 Processor RJ45 Ethernet Connector eMCP Memory USB Type A Dual Connector 51-Pin Camera Interface... -
Page 14: System Setup And Usage
Refer to Section 3.2.4 for booting. 3.2 HARDWARE OPERATION 3.2.1 CONFIGURATION SWITCHES SW4 switch on the Inforce 6309 board can be used for configuring the board for various modes of operations. Each position on SW4 has a defined functionality: ... -
Page 15: Table 3: Boot Selection
“X” in the above table indicates a DON’T CARE situation, i.e., the functionality is independent of that switch position. Position 6 of SW4 is reserved for future use in the Inforce 6309 board. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary –... -
Page 16: Led Indications
User LED (APQ GPIO 95) ON: When CPU is out of RESET CPU RESET LED Figure 5: LED Locations on the Board 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 17: Connector Coordinates
Inforce 6309™ User Guide System Setup and Usage 3.2.3 CONNECTOR COORDINATES Figure 6: Top Connector Coordinates Figure 7: Bottom Connector Coordinates 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 18: Steps To Boot Inforce 6309 Sbc
Inforce 6309™ User Guide System Setup and Usage 3.2.4 STEPS TO BOOT INFORCE 6309 SBC 1. Remove the Inforce 6309 board carefully from the anti-static bag. NOTE Handle with care, while plugging, to avoid physical damage. 2. Connect the display through HDMI or LVDS interfaces. -
Page 19: Power Measurement
Inforce 6309™ User Guide System Setup and Usage 3.3 POWER MEASUREMENT The Inforce 6309 board has a current sense resistor and test points on 5V and 3.7V rails for current/power measurement. 3.3.1 5V RAIL TP5 and TP6 shall be used for the current measurement. -
Page 20: Gps Antenna Selection
Refer configurations listed below to change the default GPS antenna path. Table 8: GPS Antenna Selection Configurations 3.4.2 WI-FI ANTENNA SELECTION Figure 12: Wi-Fi Antenna Topology 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 21: Wifi / Bt Rf Tx Specficiations
Max output power: 4.20 dBm WLAN TX power RF output frequency range: 2412 – 2472 MHz Max Output Power: 15.90 dBm 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 22: Connector Pin Assignments
UART0_RX UART0_TX V1P8_EXP Figure 13: Expansion Connector NOTE pins have multiple APQ pins connected through a series resistor. EXP_CONN_GPIO_X 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 23: Add-On Interface Pinout
Table 11: Connector P6 Pinout Number V3P3_LDO V12_POE SYS_5P0 V12_POE CPU_GPIO_102 CPU_GPIO_101 RX_ADDON_3V3 TX_ADDON_3V3 Figure 14 : Add-On Interface Header 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 24: Front Panel Header Pinout
Table 12: Connector P1 Pinout Number KEY_VOLP_N PHONE_ON_N PM_RESIN_N APQ_GPIO_108 LED_CPURESET_CATHODE VPH_PWR USERLED1_CATHODE VPH_PWR USERLED3_CATHODE VPH_PWR VPH_PWR Figure 15: Front Panel Header 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 25: Mipi Camera Interface Pinout
MIPI_CSI0_LANE3_EMI_P CAM_MCLK0 MIPI_CSI0_LANE3_EMI_N CAM_MCLK2 FLASH_CTRL_EN1_CONN CSI1_RST_CONN FLASH_NOW_CONN MIPI_CSI0_LANE2_EMI_N CSI1_PWDN_CONN MIPI_CSI0_LANE2_EMI_P CAM_MCLK1 MIPI_CSI0_LANE1_EMI_P MIPI_CSI0_LANE1_EMI_N MIPI_CSI1_LANE1_EMI_N Figure 16: MIPI Camera Connector 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 26: Lvds Interface Pinout
LVDS_TS_RST_GPIO12_3P3 LVDS_TX3_N DISP_3P3_RST# CLK_170M_0_LVDS_P LVDS_TS_INT_GPIO13_3P3 CLK_170M_0_LVDS_N BACKLIGHT_PWM_3P3_EN I2C3_SDA_3P3 VREG_L5_1P8 I2C3_SCL_3P3 V12_SYS_5P0_LVDS V12_SYS_5P0_LVDS LVDS_TX4_P LVDS_TX4_N LVDS_TX5_P Figure 17: LVDS Connector 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 27: Debug Uart Interface Pinout
: DF13A-6P-1.25H (50) Table 16 : Connector P5 Pinout Number APQ_MI2S1_DATA0 APQ_MI2S1_DATA1 APQ_MI2S1_SCLK APQ_MI2S_MCLK APQ_MI2S1_WS Figure 19 : I2S Header 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 28: Jtag Interface
CPU_JTAG_TMS CPU_JTAG_TCK JTAG_CONN_DET# VREG_L5_1P8 Figure 20 : JTAG Header NOTE JTAG header is depopulated in all the product SKUs. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 29: Battery Interface Pinout
For GPS: External antenna connector (J9) is connected by default, and require an external antenna for operation. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc. Provided under NDA... -
Page 30: Contact Information
© 2018 Inforce Computing, Inc. All rights reserved. All data provided is for informational purposes only and does not represent any expressed or implied guarantees. At the time of publishing, the information is believed to have been accurate; nevertheless, Inforce Computing doesn’t assume responsibility for any errors, omissions, and inaccuracies whatsoever.
Need help?
Do you have a question about the 6309 and is the answer not in the manual?
Questions and answers