Operating The Dual Alarm System - Timex T301 Owner's Manual

Operating the Dual Alarm System

This clock radio features a dual alarm system, with two separate alarms that can be
operated independently. The alarms can be set to wake two people at different times, or
to have a main alarm and a backup. One alarm features your choice of radio stations as
an alarm wake sound, while the second features a buzzer wake sound. You can set the
radio alarm, the buzzer alarm, or both alarms.
Setting Radio Alarm
1. Press the Alarm Set Button. The display will flash and the Radio Alarm Indicator
will appear. If you do not begin setting the time within ten seconds of pressing the
Alarm Set Button, the display will stop flashing and you will need to press the
Alarm Set Button again.
2. While the display flashes, press the
a button for a few seconds to advance the time rapidly. Be sure to set the correct
AM/PM time, as shown by the PM Indicator.
3. After setting the radio alarm time, you will need to select the station to wake up to.
First, press the
using the Radio Preset Buttons. For more information on programming radio
stations into memory, see the Programming Radio Station Settings section of this
manual. Rotate the
4. After setting the radio alarm wake time and sound, you will need to select your 7-5-2
setting. The 7-5-2 setting lets you set the alarm for a full week, weekdays only, or the
weekend. Before setting the alarm, be sure that the correct date is set, as shown in
the "Auto-Set" and Manual Time and Date Settings section of the manual. While the
display is still flashing, press the
5. After you have set the radio alarm wake time, wake sound, and 7-5-2 setting, press
the Alarm Set Button twice so that the display shows the standard, non-flashing
display.
Setting Buzzer Alarm
1. Press the Alarm Set Button twice. The display will flash and the Buzzer Alarm
Indicator will appear.
2. While the display flashes, press the
described above.
3. After setting the buzzer wake time, use the
7-5-2 setting, as described above.
4. After you have set the buzzer wake time and 7-5-2 setting, press the
Button once so that the display shows the standard, non-flashing display.
Tuning/Set Buttons to set the wake time. Hold
AM/FM Button to select a radio frequency. Next, select a station
Volume Thumbwheel to set a wake sound volume level.
Date/7-5-2 Button until the desired setting is shown.
Tuning/Set Buttons to set the wake time, as
8
Date/7-5-2 Button to select the buzzer
Alarm Set