Installation Instructions
9
Step
Installing The Door Brackets
The door brackets must point downward. Install the door brackets in alignment with the
support bars on the bed frame.
Install the handle (not included) on the other side of the door during this step. Handle should be
mounted at a height to comfortably allow the user to pull the bed down (approximately 1/3 of the way
down from the top of the door.)
10
Step
Installing The Doors
10.1
Hook the door brackets onto the frame and push down until they are
firmly in place. Center the doors on the frame.
10
Measurements (right) are for the
placement of this hole along the doors.
Q =
G =
Würth Baer Supply
www.wurthbaersupply.com • 800-289-2237 • Fax: 888-558-2237
102mm
4"
x 24
x12
102mm
4"
Top
256mm
10-1/16"
714mm
28-1/8"
714mm
28-1/8"
Bottom