Table of Contents
Advertisement
Available languages
Available languages
GB
2 Useful Information / 3 Getting started
2.6 Fluctuations in blood pressure
There are many factors that can influence blood pressure. Readings
can be affected seriously by stress, fear, heavy physical exertion or the
time of day at which the measurements are taken. Your personal blood
pressure values are subject to considerable fluctuation during the course
of the day and the year. These fluctuations are particularly pronounced
in the case of patients suffering from hypertension. Blood pressure is
usually at its highest during physical exertion and at its lowest at night
when you are asleep.
2.7 Influencing and evaluating readings
•
Measure your blood pressure several times, then record and compare
the results. Do not draw any conclusions from a single reading.
•
Your blood pressure readings should always be evaluated by a doctor
who is also familiar with your personal medical history. When using the
unit regularly and recording the values for your doctor, you should visit
the doctor from time to time to keep him updated.
•
When taking readings, remember that the daily values are influenced
by several factors. Smoking, consumption of alcohol, drugs and phy-
sical exertion influence the measured values in various ways.
•
Measure your blood pressure before meals.
•
Before taking readings, allow yourself at least five minutes rest.
•
If the systolic and diastolic readings seem unusual (too high or too low)
on several occasions, despite correct use of the unit, please inform
your doctor. This also applies to the rare occasions when an irregular
or very weak pulse prevents you from taking readings.
3 Getting started
3.1 Unlock transportation mode
The device has been set to a sleep mode for transportation. This sleep
mode has to be unlocked once before first use. Therefore press M -
Start - / Stop -
for transportation can only be activated by the factory.
3.2 Charging the battery
Your MEDISANA Wrist blood pressure monitor BW 300 connect
features an integrated rechargeable battery, which enables a cordless
operation of your device. Before you can use your unit, the battery should
be charged fully. Therefore connect the included mini-USB-cable to the
USB interface
utility (e.g. PC, laptop computer or mains plug with USB port etc.).
Alternatively, you can charge the device with a special mains adaptor
(MEDISANA Art.-No. 51014) via the mini-USB-cable. During the charging
process, the display
When charging process is finished ("
without any segments flashing), disconnect the mini-USB-cable from the
device. If the "battery low"-symbol
22
and S -
on the device and to an USB-port of an active electric
shows e.g. "
buttons simultaneously. The sleep mode
" with some segments flashing.
" is displayed constantly in full
appears on the display (together
i
i
i
i
i
,
i
Advertisement
Table of Contents
