ETI 810-150 Operating Instructions

NURSERY THERMOMETER
Operating Instructions
Product code:
810-150
INSTRUMENT OPERATION - Open the battery compartment and insert the batteries
supplied. For the most accurate recording of ambient temperatures, the Nursery
thermometer should be positioned away from direct sunlight or draughts.
The coloured indicators above the temperature and humidity display are a quick reference
guide to temperature levels only.
MAX/MIN - Press the MAX/MIN button to display the maximum reading ('MAX' symbol
displayed). Press the MAX/MIN button again to display the minimum reading ('MIN' symbol
displayed). Press MAX/MIN button again to return to normal readings.
To clear the MAX or MIN reading, press the clear button when viewing the MAX or MIN
readings, '- -' will be shown and readings cleared. Please note: Max/Min readings are not
saved, so if the battery is removed or drained, the Max/Min readings will be cleared.
°C/°F - Press the °C/°F button on the front of the instrument to switch between Centigrade
and Fahrenheit.
BATTERY REPLACEMENT - Replace the batteries when the display dims, using 2 x AAA
or 1.5 volt equivalent. The batteries are located under the battery cover at the rear of the
instrument.
GUARANTEE - This instrument carries a one-year guarantee against defects in either
components or workmanship. During this period, products that prove to be defective will, at
the discretion of ETI, be either repaired or replaced without charge. The product guarantee
does not cover damage caused by fair wear and tear, abnormal storage conditions,
incorrect use, accidental misuse, abuse, neglect, misapplication or modification. Full details
of liability are available within ETI's Terms & Conditions of Sale at etiltd.com/terms. In line
with our policy of continuous development, we reserve the right to amend our product
specification without prior notice.