Broan QTR070C Instructions Manual
Broan QTR070C Instructions Manual

Broan QTR070C Instructions Manual

Hide thumbs Also See for QTR070C:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

MODEL QTR070C
VENTILATION FAN
READ AND SAVE THESE INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer.
If you have any questions, contact the manufacturer at the
address or telephone number listed in the warranty.
2. Before servicing or cleaning unit, switch power off at
service panel and lock the service disconnecting means to
prevent power from being switched on accidentally. When the
service disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to the
service panel.
3. Installation work and electrical wiring must be done by a
qualifi ed person(s) in accordance with all applicable codes
and standards, including fi re-rated construction codes and
standards.
4. Sufficient air is needed for proper combustion and
exhausting of gases through the fl ue (chimney) of fuel burning
equipment to prevent backdrafting. Follow the heating
equipment manufacturer's guideline and safety standards such
as those published by the National Fire Protection Association
(NFPA), and the American Society for Heating, Refrigeration
and Air Conditioning Engineers (ASHRAE), and the local code
authorities.
5. When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
6. Ducted fans must always be vented to the outdoors.
7. Acceptable for use over a tub or shower when connected to
a GFCI (Ground Fault Circuit Interrupter) - protected branch
circuit (ceiling installation only).
8. This unit must be grounded.
9. When applicable local regulations comprise more restrictive
installation and/or certifi cation requirements, the aforementioned
requirements prevail on those of this document and the installer
agrees to conform to these at his own expenses.
10. When performing installation, servicing or cleaning this unit, it
is recommended to wear safety glasses and gloves.
!
CAUTION
1. For general ventilating use only. Do not use to exhaust
hazardous or explosive materials and vapors.
2. To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off power
unit.
3. Please read specifi cation label on product for further information
and requirements.
Installer: Leave this manual with the homeowner.
Register your product
online at www.broan.ca
CLEANING & MAINTENANCE
For quiet and efficient operation, long life, and attractive
appearance - lower or remove grille and vacuum interior of unit with the
dusting brush attachment.
The motor is permanently lubricated and never needs oiling. If the
motor bearings are making excessive or unusual noises, replace
the motor with the exact service motor. The impeller should also
be replaced.
OPERATION
Use an on/off switch or speed control to operate this ventilator.
See "Connect Wiring" for details.
WARRANTY
BROAN-NUTONE CANADA INC.
THREE-YEAR LIMITED WARRANTY
Broan-NuTone Canada warrants to the original consumer purchaser of its products that
such products will be free from defects in materials or workmanship for a period of three
(3) years from the date of original purchase. THERE ARE NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
During this three-year period, Broan-NuTone Canada will, at its option, repair or
replace, without charge, any product or part which is found to be defective under
normal use and service.
THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS
OR TUBES, BULBS OR BATTERIES, FILTERS, DUST, ROOF CAPS, WALL CAPS
AND OTHER ACCESSORIES FOR DUCTING. This warranty does not cover (a)
normal maintenance and service or (b) any products or parts which have been subject
to misuse, negligence, accident, improper maintenance or repair (other than by
Broan-NuTone Canada or an authorized representative), faulty installation or
installation contrary to recommended installation instructions.
The duration of an implied warranty is limited to the three-year period as specifi ed for
the express warranty.
BROAN-NUTONE CANADA'S OBLIGATION TO REPAIR OR REPLACE, AT
BROAN-NUTONE CANADA'S OPTION, SHALL BE THE PURCHASER'S SOLE AND
EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN-NUTONE CANADA
SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR
PERFORMANCE. This warranty supersedes all prior warranties.
To qualify for warranty service, you must (a) notify Broan-NuTone Canada at the address or
telephone number stated below, (b) give the model number and part identifi cation and
(c) describe the nature of any defect in the product or part. At the time of requesting
warranty service, you must present evidence of the original purchase date.
Date of Installation
Model Number and Product Description
IF YOU NEED ASSISTANCE OR SERVICE
For the location of your nearest Broan-NuTone Canada Inc. dealer:
Product model number • Date and proof of purchase • The nature of the diffi culty
1140 Tristar Drive, Mississauga, Ontario L5T 1H9
MODEL QTR070C
BB0016
Builder or Installer
Dial Toll Free: 1-888-882-7626
Please be prepared to provide:
Broan-NuTone Canada Inc.
Page 1

Advertisement

Table of Contents
loading

Summary of Contents for Broan QTR070C

  • Page 1 PERFORMANCE. This warranty supersedes all prior warranties. 10. When performing installation, servicing or cleaning this unit, it To qualify for warranty service, you must (a) notify Broan-NuTone Canada at the address or is recommended to wear safety glasses and gloves.
  • Page 2: Typical Installations

    MODEL QTR070C Page 2 TYPICAL INSTALLATIONS PLAN THE INSTALLATION COOKING AREA Do not install above or inside this area. 45º 45º NOT FOR USE IN Cooking A COOKING AREA. Equipment H0001A Floor Housing mounted to I-joists. BH0007A Use I-joist spacer block (provided).
  • Page 3: Connect Wiring

    MODEL QTR070C Page 3 INSTALL HOUSING & DUCT CONNECT WIRING 1. Bend housing tabs. Use a pliers to bend housing TABS out to 90°. TABS BD0011 2. Mount SPACER (use for mounting to I-Joist) housing to joist. Hold housing in place so that...
  • Page 4: Service Parts

    MODEL QTR070C Page 4 INSTALL GRILLE 6. Finish ceiling. Install ceiling material. Cut out around housing. 7. Attach grille to housing. Squeeze grille springs and insert them into slots on each side of housing. BO0001 8. Push grille against ceiling.
  • Page 5: Utilisation Et Entretien

    AVEC CELLES-CI. Cette garantie annule toutes les garanties précédentes. lesdites exigences prévalent sur celles de ce document et Pour obtenir le service après-vente aux fi ns de la garantie, vous devez (a) aviser Broan-NuTone l’installateur entend s’y conformer à ses frais.
  • Page 6: Planification De L'installation

    MODÈLE QTR070C Page 6 PLANIFICATION MONTAGES TYPES DE L’INSTALLATION ENTRETROISE ZONE DE CUISSON POUR SOLIVE EN « » N’installez pas au-dessus ou à l’intérieur de BRIDES DE MONTAGE cette zone. CÂBLE ÉLECTRIQUE 45º 45º BOÎTIER NE PAS UTILISER DANS SOLIVE MATÉRIAU...
  • Page 7: Branchement Électrique

    MODÈLE QTR070C Page 7 INSTALLER LE BOÎTIER ET LE CONDUIT BRANCHEMENT ÉLECTRIQUE 1. Pliage des pattes NOIR NOIR du boîtier. INTERRUPTEUR Utiliser des pinces MARCHE/ARRÊT BLANC pour plier les (ON/OFF) PATTES du boîtier PATTES à 90°. NOIR BLANC BLANC LIGNE D’ENTRÉE...
  • Page 8: Installation De La Grille

    MODÈLE QTR070C Page 8 INSTALLATION DE LA GRILLE 6. Finition du plafond. Installer le matériau de plafond. Découper autour du boîtier. 7. Fixation de la grille au boîtier. Serrer les ressorts de la grille et les insérer dans les fentes de chaque côté...

Table of Contents