Related Manuals for Xiaomi PMA Graphene
Summary of Contents for Xiaomi PMA Graphene
- Page 1 Happy using of the heating belt PMA Graphene Heating Belt! Пожалуйста, подключите батарею к поясу, включите питание для активации пояса. 1 - Switch; 2 - USB port; 3 - Battery pocket; 4 - Velcro; 5 - Grafen module emitting heat.
- Page 2 Heating belt PMA Graphene Heating Belt Quick start guide 1 - Micro USB input connector; 2 - USB output connector. Remove a mobile power source from the shipping box, connect one end of the USB cable, that comes with the kit, to the output connector of a mobile power source.
- Page 3 1 - Switch; 2 - USB port; 3 - Pocket for the battery. Place a mobile power supply in the pocket on your belt, connect the other end of the USB cable to the USB port on your belt. * The location of the batteries of different models in your pocket may vary.
- Page 4 1 - Switch; 2 – Switch of thermostat (red, blue, green). Press the switch on the mobile power source, turn on power on the belt, the thermostatic indicator (under the PMA logo) will flash alternately red, blue and green and go out: the belt power is turned...
- Page 5 Wear the belt part of the body that needs to be heated, and fasten it with Velcro.
- Page 6 Press and hold the thermostat button for 3 seconds, the indicator will turn red (high temperature mode), press the thermostat switch again, the indicator will turn blue (middle temperature mode), press the thermostat switch again, the indicator will turn green (low temperature);...
- Page 7 Press and hold the thermostat button for 3 seconds, the belt power will turn off, then remove the belt.