Set-up the speakers
6.3
Adjustment controller
The "Level" controller is used for level adjustment over the full frequency range.
6.4
Status indication
The two-coloured LED at the front of the speaker is used as status indicator of the device.
LED green:
LED red:
6.5
LFE input
The LFE input is useful if only the two lower woofers should exclusively reproduce the LFE channel.
musikelectronic geithain GmbH
indicates normal operation of the device
indicates the operation of the overload protection circuit;
Output power limitation to protect the components from overloading
10
ME 802 K