Guarantee - Dometic Waeco ColdMachine 54 Installation And Operating Manual

Coldmachine
Stored cooling power is discharged
 automatically when the switch-off voltage is reached (see the table on
page 40)
 or manually by pressing the discharge button (fig. 1 A2 or fig. 2 4,
page 3).
I
NOTE
The cold accumulator can only be discharged manually if it was
fully charged beforehand.
The accumulator is automatically charged if,
 the restart voltage is exceeded
 or the accumulator is empty and you switch the device off and on
again using the control button(fig. 2 6, page 3, does only function on
VD-06).
A
NOTICE!
When you are discharging the accumulator, although there is an
external supply of power – for example to avoid operating noise
from the compressor – use the main switch to switch the unit off
(fig. 1 B1 or fig. 2 6, page 3).
I
NOTE
Please remember: Low internal temperature = high current
consumption!
9

Guarantee

The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
EN
Guarantee
49