Table of Contents
Advertisement
Parent topic:
Adjusting the Image Height
If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust
the image height using the projector's adjustable feet.
1. Turn on the projector and display an image.
2. To adjust the image height, or the projector's horizontal and vertical tilt, rotate the front or rear feet to
extend or retract them.
1
Extend the feet
2
Retract the feet
Note: You can adjust the projector's tilt up to 2°. You can also detach the feet or extend them up to
1.1 inches (28 mm) before they detach.
If the projected image is unevenly rectangular, you need to adjust the image shape.
Parent topic:
Using Basic Projector Features
Using Basic Projector Features
102
Advertisement
Table of Contents
