Advertisement
S TA RT
Instruction：
Step1：When the display shows HELLO, the dot flicks. Then press UP/DOWM for a short
second. And then switch to main menu and set it ON.
Step 2: Press Enter Button for a short second and back to main menu, switch to main menu
PGRUN and set it OFF.
Step 3: Press Enter Button for a short second and back to main menu, switch to main menu
SCHED and set it ON.
Step 4: Press Enter Button for a short second and back to main menu, switch to main menu
SCHEDI. Then Press MODE for a longer time until the display shows EVENT (1-36). It can edit 36
pieces of time events for maximum. When the value is 1, edit event 1 operating parameter.
Step 5：Switch to submenu PROG.（1，2，3）, which indicate that the program event1 run, is
shown, totaling 3, three programs under auto mode. You choose program1 here.
Step6：Switch to submenu DAY to ensure which day this event runs. You can choose from
Monday to Sunday.
DAY=MON： indicates that this event can only run on Monday；
DAY=TUE：
DAY=WED： indicates that this event can only run on Wednesday；
DAY=THU： indicates that this event can only run on Thursday；
DAY=FRI：
DAY=SAT：
DAY=SUN： indicates that this event can only run on Sunday；
DAY=ALL： indicates that this event can only run from Monday to Sunday.
Step7： Switch to submenu START to ensure when the event starts run. The time is set at 08：00.
Step8： Switch to submenu END to ensure when the event ends. The time is set at 23：00.
Step9： Switch to submenu ENABLE = ON, which represent that the time is valid.
Step10：When you repeat the steps 4 to steps 9, you can make other events run at scheduled time.
(Remark：Set SCRUN of main menu PGSET =ON)
ⅶ Temperature protection Mode：
When the temperature of the fixture is higher than 50℃，the brightness will decrease
correspondingly. When the temperature of the fixture is higher than 80℃, the fixture will be
off automatically. After the light cool off to 70℃, it will light up again.
Ⅵ
. Daily Maintenance
Trouble Shooting
Trouble
E N A B L
E N D
indicates that this event can only run on Thursday；
indicates that this event can only run on Friday；
indicates that this event can only run on Saturday；
Reasons
Trouble Shooting
Page
14 of 16
Advertisement
