Hw Vwduwhg; Prepare The Remote Control; Turn On - Philips MCD1065 User Manual

Connect power
Caution
‡
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the rear of the main unit.
‡
Before connecting the AC cord, make sure that you
have completed all other connections.
Note
‡
The type plate is located on the rear of the main unit.
1
Connect the power cord to the $&a jack
on the main unit.

Connect the power plug to the wall outlet.

 *HW VWDUWHG

Prepare the remote control

Caution
‡
Risk of explosion! Keep batteries away from heat,
VXQVKLQH RU ÀUH 1HYHU GLVFDUG EDWWHULHV LQ ÀUH
To insert the remote control battery:
1
Open the battery compartment.

Insert 2 AAA batteries with correct
polarity (+/-) as indicated.

Close the battery compartment.
Note
‡
If you are not going to use the remote control for a
long time, remove the batteries.
‡
Do not use old and new or different types of batteries
in combination.
‡
Batteries contain chemical substances, so they should
be disposed of properly.

Turn on

Press .
» The unit switches to the last selected
source.
6ZLWFK WR VWDQGE\
When the unit is turned on, press
the unit to standby.
to switch
EN 9