Specifications - Black & Decker 90521849 Instruction Manual

PSS100B_ManualEN_082807.qxp
policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with
the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service
Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and
authorized Service Centers are listed under "Tools–Electric" in the yellow pages of the phone directory and on our
website www.blackanddecker.com.
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other
rights which vary from state to state or province to province. Should you have any questions, contact the
manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-
6986 for a free replacement.

SPECIFICATIONS

RADIO
Frequency Range
FM:
AM:
GENERAL
Speaker
Full Range:
Inputs:
Outputs:
Power Output:
AC Power Adapter
Input:
Output:
AC Power inverter
Input:
Output:
Frequency:
Output Wave Form:
Overheat Protection:
Overload Protection:
Output Short Circuit Protection:
USB Charging Ports
Output:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules, These limits are designed to provide reasonable protection against harmful interference to radio
communications. However, there is not guarantee that interference to radio or television reception, with can be
determined by turning the equipment off and on, user is encouraged to try to connect the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
9/13/07 5:32 PM
87.5 – 108 MHz
530 – 1710 kHz
10 cm (4" Inches) dia. 10 Watt Cone Type (2)
AUDIO IN Plug (stereo mini plug)
Headphone Jack (stereo mini jack) for 32 OHM impedance headphones
4 Watts + 4 Watts
120V AC, 60Hz 22Watts
12V DC 1.2A
12 Volts DC, 9.5 amps
120 Volts AC, 100 watts
60Hz
Modified sine wave
Yes
Yes
Yes
5 volts DC 500 mA (total)
BD082807
10
Page 10