BT On-Air 1000 Classic User Manual page 15

To switch keyguard off
Press the STAR button.
Press OK to confirm.
C OK
Press the UP or DOWN button to display
Set .
Press OK to confirm.
C OK
Press the UP or DOWN button to display
Keyguard .
Press OK to confirm.
C OK
The display shows
On
Press the button until the
removed from the On box.
Press OK to confirm.
C OK
To use your handset when the
keyguard is on
This temporarily switches off the keyguard
allowing you to make a call. The keyguard
will then re-activate after one minute.
Press the STAR button.
Press OK to confirm.
C OK
If you receive an incoming call whilst the
keyguard is on just press the
PHONE button.
All manuals and user guides at all-guides.com
is
GREEN
Keypad beeps and tones volume
You can set your handset to beep or play a
tone when you press a button on the
keypad.
The BT On-Air Executive will come already
set to ON.
Press the DOWN button to enter the
Ringing and beeps menu.
Press OK to confirm.
C OK
Use the UP button to scroll to Beeps .
Press OK to confirm.
C OK
The display will show either Keypad or
Battery low .
Use the UP or DOWN button to highlight
the one you wish to select then press the
OK button to confirm.
The display will show
On
Press the button to turn ON or OFF.
Press OK to confirm.
C OK
The display will then show Done .
14