Related Manuals for Pyle PLCMTR83QIR
Summary of Contents for Pyle PLCMTR83QIR
- Page 1 PLCMTR83QIR Wireless Vehicle Back-Up Camera & Monitor DVR Kit 7’’ Display, Video Recording, Quad-View Ability, Night Vision, Waterproof Cams (For Truck, Van, Bus, Trailer)
-
Page 2: Product Introduction
Please read instructions carefully before installation and use. Please keep this manual in a safe place for your future reference. Product introduction Monitor Introduction 4 5 6 7 8 9 10 11 1. 2.4G antenna 2. Sunshade 3. LOGO sticker 4. -
Page 3: Remote Control
Remote control 1. “POWER”key: Turn-OFF monitor, power ON not supported. 2. “MODE”key: Con rm mode switch 3. “ ”key: Brightness decrease key 4. “MENU”key: open or exit menu interface 5. “ ”key: the brightness increase key 6. “ ”key: the volume up function 7. -
Page 4: Function Operation
Function operation Long press the power key for 2 seconds and enter the main interface, short press to close the screen as standby MAIN MENU: Press “MENU”button on the panel or remote control lightly, enter the menu interface, there are three small menu “System Setting” “Video Files” “SD Card”. SYSTEM SETTING: Select “System Setting”, press MODE key on the panel or remote control to con rm, set the next option, after setting nished and press the MODE key... - Page 5 1. Camera Pairing: Press the MODE button to con rm. At the same time, press and hold the camera red switch pairing for about 2 ~ 5 seconds. The message "Pair OK" indicates that the pairing is successful. Otherwise, the system displays "Timeout" or pairing failure. 2.
-
Page 6: Connection Cable
Storage Card: Select "Storage card", Press the MODE button or the MODE button on the remote control to check the storage capacity or format. Press MENU to exit. Note: Please select the brand high-speed card video, otherwise there will be video crashes or do not recognize the phenomenon CONNECTION CABLE Details: DVR function does not support reversing trigger function. -
Page 7: Installation Instructions
INSTALLATION INSTRUCTIONS Note: 1. Before installing the camera, make sure that the monitor and camera are paired successfully and displays the image. 2. After installing the camera, please check if the display image is normal, if there is a blue screen or stuck phenomenon, please check the antenna if in good contact or long antenna mounted to the exterior of the car to receive a good location. - Page 8 PLCMTR83QIR Wireless Vehicle Back-Up Camera & Monitor DVR Kit 7’’ Display, Video Recording, Quad-View Ability, Night Vision, Waterproof Cams (For Truck, Van, Bus, Trailer) Features: • Wireless Camera & Monitor System • 2.4G Video Transmission • DVR Dash-Cam Bundle Kit •...
- Page 9 Cameras: • Universal Exterior Mount Design • Waterproof & Weather-Resistant • Marine Grade Camera Construction • Viewing Angle: 120 Degree • Image Sensor: 1/4’’ Color CMD OV7725 • Marine Grade Rating: IP-68 • Power Consumption: 3W • Power Supply: DC 12V •...