Installation Procedure - Swann Chesapeake Series Manual

General Information
Europa Vanity (Single Bowl)
EV-2225 (22-1/2"D x 25"W)
EV-2231 (22-1/2"D x 31"W)
EV-2237 (22-1/2"D x 37"W)
EV-2243 (22-1/2"D x 43"W)
EV-2249 (22-1/2"D x 49"W)
EV-2255 (22-1/2"D x 55"W)
EV-2261 (22-1/2"D x 61"W)
Vanity Top Accessories
Side Splash and Front Apron Panels
Side Splash Panel for Vanity Tops (one per carton)
Model Part
VT18-3SS VT01803SS
VT19-SS VT00019SS
VT21-3SS VT02103SS
VT22-SS VT00022SS
Side Splash Panel for Chesapeake (one per carton)
Model Part
CHVTSS CHVTSS
Side Splash Panel for Europa (one per carton)
Model Part
EVTSS EV00022SS
Front Apron Panel (one per carton)
Model Part
VT37FA VT02237FA
VT55FA VT02255FA
VT1B2261FA VT02261FA
Side Apron Panel (one per carton)
Model Part
VT22SA VT00022SA
800-325-7008
EUVSB-01
Dimensions
18" W x 3" H x 3/8"D
19" W x 3" H x 3/4" D
21" W x 3" H x 3/8"D
22" W x 3" H x 3/4" D
Dimensions
21-5/8" W x 3-1/2" H x 3/4" D
Dimensions
21-1/4" W x 3-1/2" H x 3/4" D
Dimensions
37" W x 8" H x 1/2" D
55" W x 8" H x 1/2" D
61" W x 8" H x 1/2" D
Dimensions
21" x 8" x 1/2" D
Unpack Carton
mUse care when opening the box not to damage the sink.
mThis product is shipped to you or your retail center after
careful inspection. After purchasing the sink, carefully
unpack and inspect the product for any shipping damage
that may have occurred. If damage is found, report it
immediately to the store of purchase. After inspection and
during installation, protect the products from construction
damage, by moving them to another room or area until ready
to install.
mPlease use the model number located on the side of the
box, or the front of this manual, when contacting us with
questions concerning the installation of this unit.
mMake sure the sink is the correct size and in good condition.
Installation of damaged product will void the warranty.
Helpful Hints
mRead these instructions carefully and familiarize yourself
with the various parts of the sink.
mThe variety of installations possible for this sink may require
procedures other than those shown. Ensure construction is
correctly sized, plumb, and square.
mAllow sufficient time for the parts in this sink to adjust to
room temperature. We do not recommend installation of this
product at temperatures below 65 degrees.
mStore unused materials away from the work area to prevent
accidental damage.
mTurn off the hot and cold water supply before starting
installation.
Caulking Tips
mFollow the instructions on the caulking tube.
mWhen job is complete, inspect all caulked areas for gaps
and fill as needed.
mClean up excess silicone using denatured alcohol and a
clean cloth.
mBe very careful not to disturb caulk joints before they dry.
5

Installation Procedure

Swan