Table of Contents
Advertisement
KP-508AGF
OPERATION
Blending continuously
•
To blend continuously, turn the speed control to a position
between 1 (slow) and 5 (fast).
The blender will switch on. If you are not sure which speed
setting to use, start with a slow speed and increase the speed
setting gradually. High speeds are best if the ingredients are
quite solid.
•
Watch blending progress through the glass jug and turn the
speed control to the '0' (Off) position when you have finished
blending.
Pulse blending
Pulse blending is useful for short bursts of powerful blending.
•
Turn the speed control to the 'P' position.
•
The motor will run while the speed control is held in this
position.
•
Release the speed control to stop blending at any time.
You can turn the speed control repeatedly to the 'P' position to
blend in pulses, allowing the ingredients to settle if required.
Adding more liquid
You may find you need to add more liquid during blending.
•
Set the speed switch to the '0' (Off) position.
•
Twist the cap anti-clockwise and lift it out of the lid.
•
Pour in the additional liquid.
•
Re-fit the cap securely.
•
Continue blending.
Stirring the mixture
It may be necessary to stir the mixture to distribute the
ingredients.
•
Set the speed switch to the '0' (Off) position.
•
Lift the jug off the motor body and remove the lid.
•
Stir the mixture with a spoon.
•
Re-fit the lid, place the jug back on the motor body and
continue blending.
PAGE 9
Advertisement
Table of Contents
