Advertisement
Available languages
Available languages
■ Step 4: Install Upgrade File with USB Media
j
While pressing the "Automatic Threading" button, turn the
machine on.
k
Copy the upgrade program downloaded in step
the USB media.
Note
• When using USB media to upgrade the software, check that no
data other than the upgrade file is saved on the USB media being
used before starting to upgrade.
l
Press
m
Insert the USB media into the USB port connector marked with
. It will take a few seconds until the machine recognizes
that the USB media has been inserted into the port.
n
Press
Note
• When the message "Upgrade complete." appears, installation of
the upgrade program has been completed.
(If an error occurs, a message will appear in red.)
.
.
d
on page 6 to
9
Advertisement
