Klarstein 10031332 Manual page 6

2. Insert the plug of the cigarette lighter into the cigarette lighter in the car.
3. Cooling: set the power switch at the position of COLD. The green indicator will be on indicating the unit is in
cooling mode.
4. Heating: set the switch at the position of HOT. The red indicator will be on indicating the unit is in heating
mode.
If you want to set an increased energy efficiency and a limited cooling capacity for the cooler unit, use the
cooler's ECO mode.
When the DC 12 V car power is used:
1. The car engine is required.
2. The plug of DC power cord is the cord into the socket of the ligh-
ter in the car.
3. Insert the plug of DC power cord into the socket of the lighter in
the car.
4. Adjust the control switch to choose cold or hot mode. But ECO
and MAX patten are useless.
When the 220-240 V household power is used:
1. Connect the connector of AC power cord (household power cord )
with the household socket of the product.
2. Insert the power socket into the concentric plug.
3. Adjust the control switch to choose cold or hot mode. When
turning cold, ECO is power saving mode, MAX means maximum
refrigeration, off means turn off.
Accessory and Connections
6