Autocall TrueAlert ES A49SV-APPLW-O Installation Instructions Manual

Addressable us/weather proof wall mount speaker notification appliances

Advertisement

Quick Links

TrueAlert ES Addressable US/Weather Proof Wall Mount Speaker Notification Appliances

Cautions, warnings, and regulatory information

Important: When the notification appliance emits light or sound, it indicates the possibility of an emergency situation that requires immediate atten-
tion of all occupants.
SAFETY: Always install, maintain, and test notification appliances within their specifications. Failure to follow all safety precautions and
instructions may result in loss of life and property due to non-functioning notification appliances. Some notification appliances use high
voltage. To avoid electrical hazards and avoid damage to appliances, make sure that the electrical power for the Notification Appliance
Circuit is disconnected at the control panel before installing, repairing, or internally adjusting any notification appliances. Even with
electrical power removed, some notification appliances (such as visible strobes) store a high voltage charge. The high voltage can cause
injury resulting in death from electrical shock. DO NOT TOUCH EXPOSED CIRCUITRY.
LOCATION REFERENCE: Location and quantity of appliances required must conform to the applicable local standards and guidelines
(the National Fire Alarm and Signaling Code (NFPA 72); ULC Standard CAN/ULC-S524, Installation of Fire Alarm Systems; the appropriate
model building codes, etc.) and specific requirements of the Local Authority Having Jurisdiction (AHJ). These notification appliances are
not intended for installation within hazardous locations as defined by the National Electrical Code (NEC) or NFPA.

Introduction

These appliances provide a speaker only (SO) or speaker/visible (S/V) warning of an alarm condition when activated from the control panel of a
compatible UL/ULC Listed, Autocall Fire Alarm System. Consult Autocall Fire Alarm panel documentation for compatibility information. The speakers
can be turned ON/OFF individually under compatible panel control.
Type
Cover colors
• Red
Wall Mount
• White
Speaker/Visible
(S/V) with cover
• Red
• White
Wall Mount
Speaker Only
(SO) with cover
Appliance x1.
Kit contents:
Number 8-1 inch thread forming screws x 4.
Order a backplate separately for each appliance.
Not included:
Order a back box, listed above, to mount the appliance assembly to the wall.
Order a cover, listed above, separately for each appliance.
Note: For information about TrueAlert ES appliance testing, see TrueAlert ES Addressable Appliances Testing and Application Guide (579-1049AC).

Strobe operation levels

The 49 S/V appliances have multiple strobe intensity levels. Levels W15, W75, W110, and W185 are rated for UL outdoor private mode applications.
Levels 15 and 75 are rated for UL indoor and uncontrolled wet Public Mode applications.

Back box mounting instructions

1.
Select the mounting location and install the back box, see the back box installation instructions for more information.
2.
Bring the building wiring through the rectangular opening in the backplate.
3.
Connect the building wires to the backplate, see the wiring section.
4.
Secure the backplate to the electrical box using the provided hardware. Install the backplate so that the contacts are above the opening for
the wiring.
5.
Set the appliance settings. See
Table 1: Products
Models
Components:
Covers:
A49SV-APPLW-O
A49SVC-WRFEU-O
A49SV-APPLW-O-BA
A49SVC-WRFIRE-O
A49SVC-WRS-O
A49SVC-WWALT-O
A49SVC-WWBA-O
A49SVC-WWS-O
A49SVC-WWFIRE-O
Components:
Covers:
A49SO-APPLW-O
A49SOC-WRFEU-O
A49SO-APPLW-O-BA
A49SOC-WRBF-O
A49SOC-WRBC-O
A49SOC-WRBA-O
A49SOC-WWS-O
A49SOC-WWFIRE-O
A49SOC-WRBLANK-O
A49SOC-WRFIRE-O
Setting the address DIP
switch.
Installation Instructions
A49SVC-WRBF-O
Backplates:
A49SVC-WRBC-O
A49MP-SVWR
A49SVC-WRBA-O
A49MP-SVWW
A49SVC-WRALT-O
Back boxes:
A49SVC-WWBC-O
A49WPBB-SVWR
A49SVC-WWBF-O
A49WPBB-SVWW
A49SVC-WWFEU-O
Backplates:
A49SOC-WRS-O
A49MP-SOWR
A49SOC-WWBA-O
A49MP-SOWW
A49SOC-WWBC-O
Back boxes:
A49SOC-WWBF-O
A49WPBB-SOWR
A49SOC-WWFEU-O
A49WPBB-SOWW
A49SOC-WWBLANK-O
A49SOC-WWALT-O
A49SOC-WRALT-O
*05791237ACA*
579-1237AC Rev. A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TrueAlert ES A49SV-APPLW-O and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Autocall TrueAlert ES A49SV-APPLW-O

  • Page 1: Installation Instructions

    These appliances provide a speaker only (SO) or speaker/visible (S/V) warning of an alarm condition when activated from the control panel of a compatible UL/ULC Listed, Autocall Fire Alarm System. Consult Autocall Fire Alarm panel documentation for compatibility information. The speakers can be turned ON/OFF individually under compatible panel control.
  • Page 2: Wiring Instructions

    TrueAlert ES Addressable US/Weather Proof Wall Mount Speaker Notification Appliances Installation Instructions To attach the cover to the appliance, carefully move the cover over the housing. Move the cover down over the housing and press it until it snaps onto the housing. Attach the assembled appliance to the backplate.
  • Page 3 TrueAlert ES Addressable US/Weather Proof Wall Mount Speaker Notification Appliances Installation Instructions Important: Do not bring the conduit through the rear of the electrical box. Strip the lead insulation to 7/16 inch maximum. Figure 2: Wiring instructions Note: Wiring notes Assign a maximum of 127 active appliances to a circuit.
  • Page 4 TrueAlert ES Addressable US/Weather Proof Wall Mount Speaker Notification Appliances Installation Instructions Figure 3: Setting the DIP switch address Setting the strobe candela setting The jumpers are factory set to FACP. Use this setting when programming the candela level at the 4100ES FACP. The candela setting is visible through the slot on the side of the appliance.
  • Page 5 TrueAlert ES Addressable US/Weather Proof Wall Mount Speaker Notification Appliances Installation Instructions Audio circuit configuration for S/V and SO appliances Move the wire harness position to the correct terminal post for audio circuit voltage and power tap selection. See Figure 4 and Table 4. Figure 4: Setting the strobe and appliance configuration Appliance specifications Table 2: Environmental specifications...
  • Page 6 41 % © 2018 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision and are subject to change without notice. Additional listings may be applicable, contact your local Autocall product supplier for the latest status. Listings and approvals under Tyco Fire & Security GmbH, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. NFPA 72 and National Fire Alarm Code are registered trademarks of the National Fire Protection Association (NFPA).

This manual is also suitable for:

Truealert es a49sv-applw-o-baTruealert es a49so-applw-oTruealert es a49so-applw-o-ba

Table of Contents