General Description - Philips HR2636 Manual

Hide thumbs Also See for HR2636:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH
Introduction
Congratulations on your purchase and welcome to Philips! To fully
benefit from the support that Philips offers, register your product at
www.philips.com/welcome.

General description

1
Speed selector
2
Power-on button
3
TURBO button
4
Motor unit
5
Release button
6
Blender bar with integrated blade unit
7
Whisk coupling unit (HR2633,HR2632 only)
8
Whisk (HR2633,HR2632 only)
9
Compact chopper lid (HR2633, HR2632 only)
10 Compact chopper blade unit (HR2633, HR2632 only)
11 Compact chopper bowl (HR2633, HR2632 only)
12 Double beater coupling unit (HR2636 only)
13 Beaters (HR2636 only)
14 XL chopper lid (HR2636, HR2633 only)
15 XL chopper blade unit (HR2636, HR2633 only)
16 XL chopper bowl (HR2636, HR2633 only)
Important
Read this user manual carefully before you
use the appliance and save it for future
reference.
Danger
- Never immerse the motor unit in water or
any other liquid and do not rinse it under
the tap. Only use a moist cloth to clean the
motor unit.
Warning
- Check if the voltage indicated on the
appliance corresponds to the local mains
voltage before you connect the appliance.
- Do not use the appliance if the plug, the
mains cord or other parts are damaged or
have visible cracks.
- If the mains cord is damaged, you must
have it replaced by Philips, a service centre
authorised by Philips or similarly qualified
persons in order to avoid a hazard.
- This appliance can be used by persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and if they
understand the hazards involved.
- This appliance shall not be used by
children. Keep the appliance and its cord
out of the reach of children.
- Children shall not play with the appliance.
- Do not touch the cutting edges of the blade
units under any conditions, especially when
the appliance is plugged in. The cutting
edges are very sharp.
- Never use a chopper blade unit without a
chopper bowl.
- To avoid splashing, always immerse the
blender bar into the ingredients before you
switch on the appliance, especially when
you process hot ingredients.
- Be careful when you pour hot liquid into
the beaker, as hot liquid and steam may
cause scalding.
- If one of the blade unit gets stuck, unplug
the appliance before you remove the
ingredients that block the blade units.
Caution
- None of the accessories is suitable for use
in the microwave.
- Always disconnect the appliance from the
mains if you leave it unattended and before
you assemble, disassemble or clean it.
- Never use any accessories or parts from
other manufacturers or that Philips does
not specifically recommend. If you use
such accessories or parts, your guarantee
becomes invalid.
- This appliance is intended for household
use only. If the appliance is used
improperly or for professional or semi-
professional purposes or if it is not used
according to the instructions in the user
manual, the guarantee becomes invalid
and Philips refuses any liability for damage
caused.
- Only use this appliance for its intended
purpose as shown in the user manual.
- Never fill the beaker, XL chopper bowl
(specific types only) or compact chopper
bowl (specific types only) with ingredients
that are hotter than 80°C/175°F.
- Do not exceed the quantities and
processing times indicated in the table.
- Do not use the appliance with any of
the accessories longer than 3 minutes
without interruption. Let the appliance cool
down for 15 minutes before you continue
processing.
- Clean the blade unit of the blender bar
under the tap. Never immerse in water.
- After cleaning, let the blender bar dry.
Store it either horizontally or withthe blade
pointing upwards. Make sure the blade
unit is completely dry before you store the
blender bar.
- Maximum noise level: 85db(A)
Overheat protection
This appliance is equipped with overheat protection. If the appliance
overheats, it switches off automatically. Unplug the appliance and let it
cool down for 10 minutes. Then put the mains plug back into the wall
socket and switch on the appliance again. Please contact your Philips
dealer or an authorised Philips service centre if the overheat protection
is activated too often.
Electromagnetic fields (EMF)
-
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr2633Hr2632

Table of Contents