Denver CSP-5165 Quick Start Manual

DENVER CSP-5165

Before you install:

Before permanently installing the DENVER CSP-5165 speakers in your car, connent the wires to
the speakers according to your audio systems installations manual, in the approximate location you
will install them. If you are satisfied with the locations proceed with the permanent installation.

Warning:

Before you install the DENVER CSP-5165 speakers, please make sure you have enough
depth/space behind the mounting surface. You do not want the back of the speaker magnet to touch
any part of your vehicle, ir interfere with the operation of function of any component in your
vehicle (windows or trunk lit)
2.5" OR 6.5 CM

Location of the speakers:

The placement of the of the speakers will vary from vehicle to vehicle. Most vehicles have factory
cut-outs on the rear window deck behind the rear seat, in the front doors, or front kick panels.
Before permanently installing the DENVE CSP-5165 speakers in your car, connect the wires to the
speakers according to your audio systems installation manual, in the approximate location you will
install them. If you are satisfied with the location proceed with the permanent installation.