Greenlee FishFinder Plus FF200 Instruction Manual page 10

Operation (cont'd)
Reviewing Saved Images (thumbnail or full screen mode)
From the live screen, press the playback button
scan through thumbnail images. Press the select button
Deleting Saved Images (thumbnail or full screen mode)
While in the playback mode, scroll to the image to be deleted, press the delete button
then press the select button
Format Media
If the unit is turned off while a picture is being saved, the media may need to be reformatted in
order to recover the usable memory on the device. (Otherwise, the memory may be corrupt from
the partially saved image.) Reformatting will delete all saved images.
To format the media:
Press and hold the delete button
Battery Life Indicator
A battery indicator icon, which displays the remaining battery life, is visible in the upper right-
hand corner of the screen. When the indicator turns red, change the batteries immediately.
Transferring Images to a Computer
1. Use the USB cable to connect the FF200 handheld device to the computer.
2. Plug the USB cable into the FF200 handheld device and the computer.
3. Power the device ON. A splash screen showing "USB Connected" will momentarily appear on
the LCD screen.
4. Click on the "My Computer" icon on your desktop.
5. Select the removable disk from the available drives.
Note: Care should be taken when reviewing images and videos with this method. Files can
be permanently deleted from this screen. (Files are not recoverable once deleted.)
This inspection device is equipped with internal memory with the ability to store a minimum
of 2000 images.
6. Open the "DCIM" folder.
7. Open the appropriate destination folder.
8. Copy and paste the images into the folder of your choice on your computer's hard drive.
10
.
for 5 seconds. Then press the select button
to change modes. Use the scrolling keys to
for full screen display.
, and
.