Table of Contents
Advertisement
Custom installation (C.I.) use
The CXC feature a Control Bus input/output that allow un-modulated
remote control commands (positive logic, TTL level) to be received
electrically by the unit and looped to another unit if desired. These control
commands are typically generated by custom installation (multi-room)
systems or remote IR receiver systems. The Control Bus sockets are colour-
coded orange.
An IR Emitter Input is also provided that allows modulated IR remote
control commands to be received electrically by the unit. Commands on
this input operate the unit only and are not looped out demodulated on
the Control Bus Output.
In addition the units feature 'direct' IR/Control codes as well as toggle
codes for some of their features to simplify programming custom
installation systems. Special direct On/Off commands can be accessed
on the supplied remote control for teaching into C.I. systems or learning
remotes as follows:
1. To send a discrete Power On command, press down the skip back button
and the power toggle button.
2. To send a discrete Power Off command, press down the skip forward
button and the power toggle button.
A full code table for this product is available on the Cambridge Audio
website at www.cambridge-audio.com.
Technical specifications
Total correlated jitter
S/PDIF output impedance
or TOSLINK optical
Digital audio outputs
Maximum power consumption
Standby power consumption
Dimensions (H x W x D)
Weight
<140pS
<75ohms
S/PDIF coaxial and
TOSLINK optical
25W
<0.5W
85 x 430 x 315mm
(3.3 x 16.9 x 12.4")
4.7kg (10.3lbs)
Troubleshooting
THERE IS NO POWER
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check fuse in the mains plug or adaptor.
THE PLAYER WILL NOT READ THE DISC
Check the disc is not loaded upside down.
Check that the disc is not too scratched or dirty.
THERE IS NO SOUND
Ensure that the amplifier is set correctly.
Check that the interconnects are inserted correctly.
THE DISC IS SKIPPING
Check that the disc is not too scratched or dirty.
Ensure the player is on a firm surface and not subject to vibrations.
THERE IS A HUM COMING FROM THE SPEAKER
Ensure that all cable connections are secure.
THE REMOTE HANDSET WILL NOT FUNCTION
Check that the batteries have not expired.
Ensure that nothing is blocking the remote sensor.
In the event that the above solutions do not remedy your problem, please
consult our frequently asked questions (FAQ) section on our website:
techsupport.cambridgeaudio.com
You can also use this facility to post a question to our Technical Support
team.
For all servicing, in or out of warranty, please contact your dealer.
Advertisement
Table of Contents
