Panasonic KX-TCD300FXS Service Manual page 55

Items
(P) Power RAMP
Confirmation
(Q)* Audio Check
(R) Charging Check
Check
Point
- Follow steps 1 to 6 of (I).
7.Confirm that Power RAMP is matching.
- 1. Link with Handset.
2. Input -45dBm/1kHz to MIC of Handset.
Measure the Level at Line I/F and distortion level.
3. Confirm that the level is -7.5dBm ± 2dBm and that the distortion level is < 5%
at TEL Line (600Ω Load).
4. Input -20dBm/1kHz to Line I/F.
Measure the level at Receiver of Handset and distortion level
(*Receive volume set to second position from minimum).
5. Confirm that the level is -20.5dBm ± 2dBm and that the distortion level is <
5% at Receiver (Volume Middle, 150Ω Load).
- 1. Connect Charge Contact 12Ω/2W resistor between charge+ and charge-.
2. Measure and confirm voltage across the resistor is 2.85V ± 0.2V.
KX-TCD300FXS / KX-TCD300FXT / KX-TCA130FXS / KX-TCA130FXT
Procedure
55
Check or
Replace Parts
IC2, IC8, R124,
R125, C153,
C140, C141,
DA1, C142,
C143, C144, L3,
L4, R118, R119,
C135, R115,
R116, Q6,
C145, C147,
C149, C151,
C157, R123,
C158, C159,
C160, C161,
C162, C163,
C164, C136,
R117, R127,
C156, C154,
C155
IC8, CN1,SA1,
L6, L7, D3, Q4,
Q5, R23, R25,
R26, R28
R3, R4, R5, D6,
C107, C180,
C181