Care And Cleaning; To Clean Hood Surface; To Clean Filters And Troughs - Thermador PH30CS Care And Use Manual

Ph series professional wall hoods

Hide thumbs Also See for PH30CS:

User manual (56 pages)

Table Of Contents

Table of Contents

Available languages

To Clean Hood Surface

•

For general care, wipe the outside of the stain-

less steel with sudsy water or household

cleaners such as Fantastic

rinse well and dry with a clean soft cloth to avoid

water marks.

•

Wipe and dry stainless steel in the same

direction as the grain. Avoid using too much

pressure, which may mar the surface.

•

Do not use abrasive products such as steel

wool.

•

To remove finger prints and give added shine,

use spray cleaners such as Stainless Steel

Magic

and Shimmer

•

Do not allow any cleaning compounds to remain

in contact with stainless steel for extended

periods.

The use of brand names is intended only to indicate

a type of cleaner. This does not constitute an

endorsement. The omission of any brand name

cleaner does not imply its adequacy or inadequacy.

Many products are regional in distribution and can

be found in the local markets. It is imperative that all

products be used in strict accordance with instruc-

tions on the package.

To Clean Filters and Troughs

Your hood has removable aluminum filters, grease

troughs and side panels. They must be cleaned

when the filter light illuminates on the control panel

or whenever they collect grease. When used over a

grill, wok or other high grease applications, more

frequent cleaning may be required.

To Remove Filters and Grease

Troughs:

•

Turn the fan and lights off. Be sure filters are

cool and grease has congealed before removal.

•

Remove in the following order:

1. Filters -Start with center filters, push

up, then pull out from the bottom.

2. Side Panels - Remove these the same

way as the filters.

3. Grease Troughs - lift up and out.

•

The filters and grease troughs can be washed

by hand or in the dishwasher. The side panels

may be washed with warm soapy water and

polished with stainless steel cleaner.

Reverse the above directions to reinsert the trough,

filters and side panels.