Subscribe to Our Youtube Channel
Related Manuals for EWM 4L T/P
Summary of Contents for EWM 4L T/P
- Page 1 Conversion instructions Retrofit option ON PS drive 4L T/P Pivot support - Wire feeder pivots 360° on the welding machine 099-002112-EWM01 Observe additional system documents! 06.07.2012...
- Page 2 © EWM HIGHTEC WELDING GmbH · Dr. Günter-Henle-Str. 8 · D-56271 Mündersbach, Germany The copyright to this document remains the property of the manufacturer.
-
Page 3: Table Of Contents
Contents Proper usage Contents 1 Contents..............................3 2 Safety instructions..........................4 3 Overview ..............................5 Proper usage ..........................5 Diagram of the assembled option ....................5 System overview..........................6 4 Conversion ............................. 7 Parts list ............................7 Assembly ............................8 4.2.1 Screwing the press arbor onto the cross arm ..............8 4.2.2... -
Page 4: Safety Instructions
Safety instructions Proper usage Safety instructions DANGER Do not carry out any unauthorised repairs or modifications! To avoid injury and equipment damage, the unit must only be repaired or modified by specialist, skilled persons! The warranty becomes null and void in the event of unauthorised interference. •... -
Page 5: Overview
Overview Proper usage Overview Proper usage WARNING Hazards due to improper usage! Hazards may arise for persons, animals and material objects if the equipment is not used correctly. No liability is accepted for any damages arising from improper usage! • The equipment must only be used in line with proper usage and by trained or expert staff! •... -
Page 6: System Overview
System overview System overview Figure 3-2 Item Symbol Description Power source ON PS drive 4L T/P Pivot support – 092-002112-00000 Hose support arm Wire feeder - drive 4L (pivotable) ON PS Trolly 55.2-2 drive 200/300C Pivot support - 092-002634-00000 099-002112-EWM01... -
Page 7: Conversion
Conversion Parts list Conversion Parts list NOTE Before conversion, check that the retrofit kit is complete (see parts list). Figure 4-1 Item 0 Quantity Description Item number Threaded press arbor 094-007483-00005 Press arbor guide bushing (socket is pressed into the 094-007371-00004 metal sheet) Pivot support... -
Page 8: Assembly
Conversion Assembly Assembly 4.2.1 Screwing the press arbor onto the cross arm Figure 4-2 • Insert the press arbor into the cross arm through the guide bushing (threaded hole in the press arbour is pointing downwards). • Screw the press arbor onto the plain washer, fan-type lock washer and screw. 099-002112-EWM01 06.07.2012... -
Page 9: Fitting The Adapter Plate
Conversion Assembly 4.2.2 Fitting the adapter plate DANGER Risk of injury due to unsuitable lifting eye! In case of improper use of lifting eyes or the use of unsuitable lifting eyes, persons can be seriously damaged by falling equipment or add-on components! •... -
Page 10: Final Assembly
Technical data Final assembly Final assembly WARNING Danger due to failure to carry out the final inspection! Parts that are incorrectly fitted or that become loose are a source of danger. • Check all mechanical connections to ensure that they are fitted correctly! •...
Need help?
Do you have a question about the 4L T/P and is the answer not in the manual?
Questions and answers