8. FUSE REPLACEMENT
If the built-in LED in the multi-purpose connector is no longer lit, the built-in fuse has blown.
To replace the fuse, proceed as follows:
• Unscrew the front cover of the multi-purpose connector.
• Replace the faulty fuse by a fuse of the same type having the same tripping characteristic
and the same rated current.
• Screw the front cover of the multi-purpose connector back on.
9. MAINTENANCE AND CLEANING
• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
could damage the casing or even impair the functioning of the product.
• Use a dry, lint-free cloth to clean the product.
10. DISPOSAL
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
11. TECHNICAL DATA
Max. load capacity .........................................12 V/DC, 1.5 A
Fuse ...............................................................2 A / 250 V / slow action (5 x 20 mm)
Plug-in adapter .............................................. 2.35 x 0.75; 3.5 x 1.35; 4.0 x 1.7;
14
5.0 x 2.1; 5.5 x 1.5; 5.5 x 2.5 mm
jack plug 2.5; 3.5 mm mono