Learning The Remote Control; Deleting All Codes; Using The Remote Control - Westfalia 84 67 47 Instruction Manual

Learning the Remote Control

1. For learning the remote control, press the LNSW button. The
LED (LEARN) lights up.
2. Press one button on the remote control twice within 2 seconds.
The LED lights up for 4 seconds and indicates that the remote
control has been learned successfully.

Deleting all Codes

For deleting all codes press the LNSW button and keep it pressed
until the LED switches off. Now all codes are deleted.

Using the Remote Control

1. Press the button A on the remote control for the
following functions: Gate open – Stop – Gate
close – Stop – Gate open.
2. If the DIP switch settings 1 and 2 for pedestrian
mode are activated, press the button B for the
following functions: the gate will open according
to the adjusted time.
Remote Control
19