Serial Data Cable System; Installation On Wall - Favero FC Series Installation And Use Manual

E NG LISH

6. Serial data cable system

Such system is not necessary in case of wireless communication with the control Console; however, a
cable connection can still be used. Use a network cable (read also the control Console manual).
To install the serial cable correctly, follow the directions below:
• under any circumstances, do not pass the cable through the same conduits used for the
cables of the electrical system, both for safety reasons as well as to avoid electrical
disturbances from motors, air conditioners, generators, etc.;
• avoid placing the cable where it may be exposed to high temperatures, mechanical damage
or vandalism;
• make sure that 50-100 cm of the serial cable remains free and exits the top of the scoreboard
about midway between the brackets (see chapter 8.1);
• if you want a point of disconnection near the Command Console, use a short extension cord.

7. Installation on wall

Before installing the assembled scoreboard on the wall, we suggest first running a check test
(see chapter 8.2).
7.1. Selecting the correct position
Select the position on the wall where you want to install the scoreboard; the board should be installed
high enough on the wall to prevent possible attempts at vandalism, but not too high to inhibit proper
maintenance. Be reminded that the FC series scoreboards are resistant to damage from balls and
therefore no additional front protection cover is required.
Make sure that the wall can support the weight of the scoreboard and that the fixing elements
are suitable for the type of wall and environment (e.g., possible corrosion due to dampness).
Consult a professional in the field.
7.2. Installing the scoreboard
To wall mount use the oval holes at the end of the supporting brackets. The horizontal distance between
the fixing holes is:
• central panel: 126.8 cm;
• side panels: 33.8 cm (only fouls) and 41.8 cm (player's number + fouls);
• between central panel and side panels: 15.0 cm.
The vertical distance depends on the model
FC62H25N12B2
203.0 cm
FC60H25N12B2
203.0 cm
Vertical center distance of the fixing holes.
Tab. 2
1. Drill the upper fixing holes in the wall.
2. Lift the scoreboard and correctly secure it.
3. The scoreboard is now adequately installed. However, seeing that there are also lower bracket
eyelets, you may also wish to fasten the bottom part of the scoreboard to the wall; this will help to
prevent possible oscillation.
Make sure that you have securely fastened the scoreboard to the wall in order to prevent
possible collapse and harm to persons or objects.
10
/ 94
FC56H25-12A1 FC62H25N
145.1 cm 180.4 cm
FC54H25N12A1 FC60H25N
145.1 cm 170.4 cm
00304-M02-03 - ML-FC serie scoreboards - User Manual Rev03 - 160826 -
(Tab. 2).
FC54H25N
145.1 cm
FC54H25
120.1 cm
FC50H25N FC56H20
110.1 cm 135.1 cm
FC50H25 FC54H20
84.9 cm 110.1 cm
FAV E RO E L EC T RO NIC S
FC50H20
74.9 cm